LSBC/LSBP Series Accelerometer The Jewell LSB Series Accelerometer is a general purpose ±0.5G to ±20G device designed for rail, commercial, and aerospace sensing requirements. FEATURES: • ±0.5g to ±20.0g Full Range • Bandwidth up to 200 Hz • Satellite Application Reliability • Better than 20 µg Res at 10g Full Scale • Available with 1g Bias Options • -55°C to +95°C Operating Temp Range • Standard for Train Control for more than 30 years APPLICATIONS: • Train Braking & Banking • Train Performance Testing • Acceleration Control • Automotive Performance Testing • Active Damping • Rail Car Monitoring • Lateral Acceleration Sensing • Tilt Train Controls • Super-elevation Measurement • Rail Car Vibration Testing • Wind shear Detection • Autopilot • AHARS • Wind Turbine Control Dimensions: in [mm] NOTES: 1. DATUM -A- AND -B- ARE DEFINED AS REFERENCE SURFACES. 2. CAUTION!: A 0.1 F, 200 VOLT CAPACITOR IS CONNECTED INTERNALLY FROM PIN B TO CASE. TAKE THIS INTO ACCOUNT IF DIELECTRIC TEST IS MADE FROM PIN TO CASE. 3. JUMP PINS B & E FOR VOLTAGE OUTPUT OPERATION. +VDC POWER POWER COMMON VOLTAGE OUTPUT (HIGH SIDE) & SELF TEST RETURN VOLTAGE OUTPUT (LOW SIDE) SELF TEST

MATING CONNECTOR AND CABLE ASSEMBLIES CONNECTOR CABLE Contact manufacturer for custom lengths PIN OR CONNECTOR PIN CONNECTOR PIN CONNECTOR PIN CONNECTOR PIN CONNECTOR PIN CONNECTOR PIN CONNECTOR 850 Perimeter Road Manchester, NH 30103 USA SENSORS: 800.227.5955 | METERS & AVIONICS: 800.638.3771 www.jewellinstruments.com | [email protected]