Catalogs >
Jewell Instruments >
LDF-1600 Series Single Axis Digital Inclinometer / Accelerometer

LDF-1600 Series Single Axis Digital Inclinometer / Accelerometer
2Pages

Catalog excerpts

LDF-1600 Series Single Axis Digital Inclinometer / Accelerometer - 1

LDFLDF-1600 Series Single Axis Digital Inclinometer / Accelerometer The LDF-1600 Series takes Jewell’s highly accurate closed loop sensor technology to the next level. An internal processor closes the servo loop and allows the LDF to compensate for errors including thermal sensitivity, thereby ensuring the highest level of accuracy over the entire operational temperature range. It features a proprietary protocol that contains advanced forward error correction and error detection. The LDF series also features both RS-422 (TIA/EIA422 compliant) and analog voltage output as standard. LDF-1600 Series Digital Specifications Performance Applications Antenna Leveling Structural Monitoring Tunneling & Mining Equipment Weapons Platforms & Targeting Maximum input range, degrees: Accuracy, angle, maximum error All error sources including temperature, angular degrees: Angles of ±30 degrees or less: Angles of ±60 degrees or less: Output at zero tilt, degrees, maximum: Angular zero drift over temperature, degrees, maximum: Servo bandwidth, Hz, nominal2: Filter bandwidth, Hz, nominal: Transverse axis misalignment, degrees, maximum3: Resolution, bits reported: Angular resolution and threshold, micro degrees: Noise floor, degrees rms, maximum4: Warm-up time, minutes, maximum: (g) Errors with optional acceleration output. Output in degrees (Arc Sin) standard. Electrical Supply voltage, Volts DC: Power consumption, Watts, maximum: Case to ground voltage, Volts, maximum: 1 2 3 4 ±1g at ±90 angular degrees. LDF acceleration input range is greater than ±2g. The servo bandwidth is the internal bandwidth of the sensor that is before any filter that might be selected. Output axis misalignment digitally compensated to zero. Dependent on filter settings and input angle. Specification for 10Hz bandwidth for angles of ±30° and lower.

Open the catalog to page 1

LDF-1600 Series Single Axis Digital Inclinometer / Accelerometer - 2

Standard Inclinometer Polarity X-AXIS (PITCH) FLANGE MOUNTED DOVW (STANDARD MOUNTING) TILT SHOWN Outline Diagram NOTE: IN ADDITION TO THD ALIGNMENT EDGD SHOWN, THD THEEE MOUNTING EEET CONSTEUCT AN ALIGNMENT DLANE. WHILE EASTENING THE UNIT, HEESS THE ALIGNMENT EDGD SDCUEELX AGAINST THE ALIGNMENT EIDGD. 850 Perimeter Road Manchester, NH 03103 USA 603-669-6400

Open the catalog to page 2