The Jewell LCF-2310 Series is an extremely rugged biaxial fluid damped flexure suspension servo Inclinometer designed for industrial, commercial and aerospace sensing requirements. The seal of the LCF-2310 is splash proof making it ideal for outdoor use. LCF-2310 Inclinometer Specifications Performance Input Range, º (Note 1) Full Range Output (FRO), VDC ±0.050% Nonlinearity, % FRO, maximum (Note 2) Scale Factor, volts/g nominal Scale Factor Temp Sensitivity, PPM/° maximum C Natural Frequency, Hz nominal (Note 3) Bandwidth (-3dB), Hz nominal Input-Axis Misalignment, º maximum Bias Volts, maximum Zero Tilt Output Temp Sensitivity, volts/ºC, maximum Resolution and Threshold, µ rad max Applications Antenna Leveling Offshore Platforms Barge Leveling and Control Vehicle Attitude Control Input Voltage, VDC4 Input Current, mA, maximum Output Impedance, ohms, nominal Noise, Vrms maximum Environmental Operating Temp Range Survival Temp Range Shock Seal 1 Full Range is defined “from negative full input to positive full input angle.” The inclinometer output is proportional to the sine of the tilt angle. 2 Nonlinearity is specified as deviation of output referenced to theoretical sine function value, independent of misalignment. 3 Output Phase angle = -90° 4 Unit Power connections can be easily adapted for operation from single-ended, floating power supplies of 24 to 36 Volts DC.

Block Diagram Outline Diagram REFERENCE SURFACES 8 through 13 - ADDITIONAL FEATURES 850 Perimeter Road Manchester, NH 03103 USA 603-669-6400