*mydirectindustry

Catalogs
Jewell Instruments
LCF-196 Data Sheet

LCF-196 Data Sheet

Product catalog summary

Overview: The LCF-196 Biaxial Series Inclinometer is a high-accuracy sensor designed for environments with significant shock and vibration. It features a two-axis tilt sensor housed in a 22 mm diameter stainless steel package, offering a measurement range from ±14.5° to ±90°, with customization options for lower ranges.

Features & Benefits:

Very low hysteresis and excellent turn-on repeatability.
High accuracy with a non-linearity of less than 0.02%.
500g shock capability and IP65 sealed housing.
Bias temperature sensitivity greater than 50µg/°C.
Compact design with a small diameter.

Applications: The inclinometer is suitable for various applications including geophysical measurement, earth movement monitoring, oil & gas well logging, dam monitoring, heavy construction, ship & barge leveling, deviation surveys, continuous casting, weapons platform leveling, and data logging.

Performance Specifications:

Static/Dynamic: Input range options are ±14.5°, ±30.0°, and ±90.0° with a full range output of ±5.0 VDC. Non-linearity is specified as 0.02% for lower ranges and 0.10% for the highest range.
Electrical: Operates within an input voltage range of ±12 to ±19 VDC, with a nominal input current of 15 mA and output impedance of 100 Ohms.
Environmental: Operating temperature range is -40°C to +80°C, with a survival temperature range of -60°C to +90°C. The device can withstand vibrations up to 10 grms and shocks up to 500g for 0.001 seconds.

Custom Capabilities: The inclinometer can be customized for lower ranges and is available in single-axis configurations for cost efficiency.

Ordering Information: The product is available in different models based on the input range: LCF-196-14.5, LCF-196-30, and LCF-196-90.

Catalog excerpts

LCF-196 Biaxial Series Inclinometer Making Sense out of Motion... lower ranges available with customization. high accuracy sensor designed for applications where high levels of shock and vibration are present. The LCF 196 is a two-axis tilt sensor in a 22 mm diameter stainless steel Features & Benefits • Excellent turn on repeatability • High Accuracy Sensor • Bias Temp Sens >50u.g/°C • Small diameter Outline Diagram WRING SHIPPING) Geophysical Measurement Earth Movement Monitoring Heavy Construction, Grading Ship & Barge Leveling Deviation Surveys Continuous Casting Weapons Platform Leveling Data Logging Pin Out (Options: C-connector, P-Pin) CASE CRMS Jewell Instruments LLC , 850 Perimeter Road, Manchester, NH 03103

Open the catalog to page 1

LCF-196 Biaxial Series Inclinometer Making Sense out of Motion… Performance Specifications STATIC/DYNAMIC Input Range, ° Full Range Output (FRO) VDC ±1%¹ Non Linearity (%FRO Max.)² Scale Factor, Volts/g, Nominal Scale Factor Temp. Sensitivity (SFTS), PPM /°C Maximum Natural Frequency, Hz Nominal³ Bandwidth (-3dB), Hz Nominal Input Axis Misalignment, ° Maximum Bias, Volts, Maximum 0° Output Temp Sensitivity, Volts/°C, Maximum Resolution and Threshold ELECTRICAL Input Voltage Range, (VDC)⁴ Input Current, mA, Nominal Output Impedance, Ohms, Nominal Noise, Vrms, Maximum Operating Temp Range Survival...

Open the catalog to page 2

LCF-196 Data Sheet

LCF-196 Data Sheet

Catalog excerpts

All Jewell Instruments catalogs and technical brochures