*mydirectindustry

Catalogs
Jewell Instruments
LCF-100/101 Datasheet

LCF-100/101 Datasheet

Product catalog summary

Overview: The LCF-100/LCF-101 Series Inclinometer by Jewell Instruments is designed for environments with high shock and vibration. It offers excellent turn-on repeatability and low hysteresis, suitable for a range of industrial applications.

Specifications:

Input Range: ±1° to ±90°
Full Range Output (FRO): ±5Vdc with a ±0.5% tolerance
Non-Linearity: Maximum 0.05% FRO
Scale Factor: Varies from 286.5 V/g to 5.0 V/g depending on the model
Temperature Sensitivity: Scale Factor Temp Sensitivity is 100 PPM/°C
Natural Frequency: 3 to 30 Hz
Bandwidth: 3 to 30 Hz (-3dB)
Transverse Axis Misalignment: Maximum 1.00°
Bias: Maximum 0.500 Volts
Resolution and Threshold: 1 µrad

Electrical Characteristics:

Input Voltage: ±12 to ±18 Vdc
Input Current: Nominal 15 mA
Output Impedance: 100 Ohms
Noise: Maximum 0.002 Vrms

Environmental Specifications:

Operating Temperature Range: -40°C to +80°C
Survival Temperature Range: -60°C to +90°C
Vibration: 20 grms
Shock: 1000g, 1 msec, 1/2 sine

Applications: The inclinometer is suitable for heavy construction, ship leveling, deviation surveys, steel industry casting, weapons platform leveling, aircraft flight control, robot referencing, auto manufacturing, geophysical tilt sensing, platform orientation, and dam sluice gate control.

Ordering Information: Models are available with pin terminals (LCF-100) or circular connectors (LCF-101), with part numbers corresponding to different input ranges.

Catalog excerpts

Making Sense Out of Motion... The LCF-100/LCF-101 Series Inclinometer provides excellent turn on repeatability and very low hysteresis The Jewell LCF-100 Series Flexure Suspension Servo Fluid Damped Inclinometer is a ±1° to ±90° device designed for applications where high levels of shock and vibration are present. Dimensional Drawing: LCF Inclinometer Series (inch/mm) Features & Benefits • Direct Bogie Mount • 3-30 Hz Bandwidth • Milligram Bias and Scale Factor • High Level ± 5Vdc Output • -40°C to +80°C Temperature Rating • Heavy Construction, Grading • Ship and Barge Leveling • Deviation Surveys • Continuous Casting for Steel Industry • Weapons Platform Leveling • Aircraft Flight Control • Robot Vertical Referencing • Auto Manufacturing Suspension Install • Geophysical Low Range Tilt Sensing • Platform Orientation • Dam Sluice Gate Control Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com •

Open the catalog to page 1

Making Sense Out of Motion... Notes: 1 - Full range is defined as "from negative full input angle to positive full input angle." The Inclinometer output is proportional to the sine of the tilt angle. 2 - Referenced to theoretical sine value independent of misalignment. 3 - Output phase angle = 90° LCF-101 (Circular Connector) Model # Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955

Open the catalog to page 2

LCF-100/101 Datasheet

LCF-100/101 Datasheet

Catalog excerpts

All Jewell Instruments catalogs and technical brochures