*mydirectindustry

LCA-100

Product catalog summary

Overview: The LCA-100 Series is a single-axis accelerometer designed for industrial, commercial, and aerospace applications. It operates within a voltage range of ±12 to ±18 VDC and offers a measurement range from ±0.5g to ±5g.

Features:

Filtering options available.
Compatible with 28V aircraft input.
0.20% scale factor stability over 10 years.
Wide bandwidths suitable for higher range applications.

Applications:

Aircraft flight controls and fatigue monitoring.
Train performance testing.
Aircraft autopilot system input and wind-shear detection.
Railcar position monitoring and automated train controls.

Specifications:

Input range options: ±0.5g, ±1.0g, ±2.0g, ±5.0g.
Full range output: ±5.0 VDC with 0.5% accuracy.
Nonlinearity: Maximum 0.05% of full range output.
Scale factor temperature sensitivity: Maximum 180 PPM/°C.
Operating temperature range: -55°C to +85°C.
Storage temperature range: -60°C to +90°C.
Shock resistance: 100g, 0.011 sec, 1/2 sine.
Weight: 4 oz.
Sealed to MIL-STD-202, Method 112.

Ordering Information: Models are available for different input ranges, each with a specific part number. Accessories include a 6-pin mating connector and various lengths of connector cables.

Catalog excerpts

LCA-100Single-Axis Analog Accelerometer The LCA-100 Series is a single axis accelerometer that is ±12 to ±18 Vdc. The Jewell LCA-100 Series Accelerometer is a general-purpose ±0.5g to ±5g device designed for industrial, commercial and aerospace sensing requirements. FEATURES: • Filtering Available • Available in 28V Aircraft Input • 0.20% 10-year Scale Factor Stability • Wide Bandwidths for Higher Range Applications • Aircraft Flight Controls • Aircraft Fatigue Monitoring • Train Performance Testing • Aircraft Autopilot System Input • Aircraft Winds-shear Detection • Double Integrated Railcar Position • Rail Automated Train Controls www.jewellinstruments.com [email protected]

Open the catalog to page 1

PERFORMANCE SPECIFICATIONS PERFORMANCE 1. Full Range is defined "from negative full input acceleration to positive full input acceleration." 2. Nonlinearity is specified as deviation of output referenced to a best fit straight line, independen of misalignment. 3. Output Phase angle = - 90°. Specifications are subject to change without notice due to continued product development

Open the catalog to page 2