Making Sense out of Motion... Digital Ethernet Output - Single and Dual Axis for a wide variety of applications. The Jewell eDXI-100/200 Series is a single or dual digital inclinometer with the convenience of Ethernet output. With its power over ethernet capability, no power source is needed. Simply plug it in to your computer. Features & Benefits • Digital output • Resolution 0.001° • Mechanical Shock 1500g 1msec 1/2 sine • Industry Standard Ethernet 10BaseT or 100 Base TX (Auto-sensing) • For use in high shock and vibration environments • PoE (power over Ethernet) • Low Noise Applications • Radar/Antenna Control • Structural Monitoring • Linear Acceleration/Deceleration Measuring • Automatic Train Control Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 FT01-01 Rev C

eDXI-100/200 Series Inclinometer Making Sense out of Motion... Recommended Mating Connector Amphenol RJF6B NOTES: 1- Full range is defined as "from negative full input angle to positive full input angle" 2 - Non-linearity is specified as deviation of output referenced to a best fit straight line, independent of misalignment. 3 - In default condition without averaging enabled. 4 - Specifications are subject to change Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955

ilBuieii Instruments Making Sense out of Motion... Description Single axis, ±1° range, fluid damped, Ethernet interface, RJ45 connector Single axis, ±3° range, fluid damped, Ethernet interface, RJ45 connector Single axis, ±14.5° range, fluid damped, Ethernet interface, RJ45 connector Single axis, ±30° range, fluid damped, Ethernet interface, RJ45 connector Single axis, ±60° range, fluid damped, Ethernet interface, RJ45 connector Dual axis, ±1° range, fluid damped, Ethernet interface, RJ45 connector Dual axis, ±3° range, fluid damped, Ethernet interface, RJ45 connector Dual axis, ±14.5° range,...