Catalogs >
Jewell Instruments >
ECOMPASS – ECS SERIES

ECOMPASS – ECS SERIES
7Pages

Catalog excerpts

Jeuieii ^^^Jnstrumentsj Making Sense out of Motion... Features ♦ High Accuracy ^ Heading within 0.5° or better ^ Tilt within 0.2° or better ♦ Wide Operating Range ^ ±42° Pitch and Roll ^ Temperature -40° to 105°C ^ Local Hard Iron to ±1.5 Gauss ♦ Fast Response ^ 27.5 readings per second ^ Wake from standby in 50 msec ♦ Single Supply Operation ^ 6 to 45V unregulated DC or ♦ Wide Selection of Output data ^ Heading, pitch, and roll ^ Total, horizontal, and vertical magnetic field strength ^ Horizontal X and Y magnetic field strength ♦ Choice of Interface ^ Full-duplex RS-232 ♦ In-System Configuration and Test ^ PC or laptop can be connected while unit operates in-situ ^ Perform hard and soft iron calibration ^ Monitor outputs and change user-definable settings The ECS series represents the state-of-the-art in magnetic compassing. It combines a precision 3-axis solid-state magnetometer and a rugged 2-axis electrolytic tilt sensor to provide accurate heading and tilt measurements over a wide range of environmental conditions. The firmware and signal processing algorithms have been refined and improved over three prior generations of compasses to deliver the ultimate in performance from the available sensor data. A key advantage of the ECS is its quick-connect, external serial interface. While the compass is inplace, and without disconnecting system wiring, a serial cable or available USB cable can be temporarily connected via the RJ12-style modular receptacle. This allows easy access during installation for calibration and tuning. It also provides a valuable diagnostic port and can be used for an auxiliary read-out when needed. In situations where a fixed installation is not desirable, the RJ12 connection can be used exclusively. Among the host of user definable parameters is the selection of NMEA output data Attitude Display in PC Software and update rate; operating mode as continuous or query-only; and angle data in degrees, mils, radians, or 16-bit integer (65536 counts per revolution). Compensation for both hard and soft iron influences is built-in. Jewell Instruments offers a development kit that includes the compass, cable, and software. The ECS is covered by a full one-year replacement warranty. Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jeweMinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955

Open the catalog to page 1

JBuieii ^^^Jnstrumentsj Making Sense out of Motion... Specifications Heading Performance Rev B Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jeweMinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955

Open the catalog to page 2

JBuieii Instruments Making Sense out of Motion... *Specifications subject to change without notice on account of continued product development Enclosure & Connector PJ - Plastic enclosure, RJ12 mod jack AC - Aluminum enclosure, circular connector Series* ECS - Electronic Compass with 3-axis magnetometer & 2-axis till sensor Example: ECS-PJ-RS232 ECS Electronic Compass with 3-axis magnetometer & 2-axis tilt sensor, plastic enclosure, RJ12 mod jack & RS232 output signal Rev B Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jeweMinstruments.com • www.jewellinstruments.com...

Open the catalog to page 3

ECS eCompass Series Making Sense out of Motion… Dimensions of Aluminum Enclosure Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955 Page 4 o

Open the catalog to page 4

JBuieii ^^^Jnstrumentsj Making Sense out of Motion... Dimensions of Plastic Enclosure Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 Rev B sales@jeweMinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955 ^ 5 f 7

Open the catalog to page 5

ECS eCompass Series Making Sense out of Motion… Pin Outs Circular Connector J1 RJ-12 Jack Pin Out Interface Block Diagram Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955 Page 6 o

Open the catalog to page 6

ECS eCompass Series Making Sense out of Motion… Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800) 227-5955 Page 7 o

Open the catalog to page 7

ECOMPASS – ECS SERIES 7Pages

Catalog excerpts

All Jewell Instruments catalogs and technical brochures

ECOMPASS – ECS SERIES
7Pages