Jewell Instruments Dynamic concrete strain gages measure axial strain in the concrete under high frequency (dynamic) conditions. Utilizing four active elements of a Wheatstone bridge circuit, this gage compensates for temperature, rejects bending strain (may also be configured to measure bending and reject axial strains), compensates for lead resistance and providing a sensor that is easily adaptable to most data acquisition systems without requiring additional signal conditioning. Because of their low profile design, these sensors can be used in concrete pavements, columns, walls, bridge elements or wherever dynamic strains need to be measured. Each sensor is provided with end washers, nuts and are individually calibrated and supplied with fabrication Quality-Control documentation. *How To Order: Model Number: CSG-3000 Part Number: 815-00002 *When ordering, please specify: S Quantity of strain gages S Required cable length per gage Purchase of Strain Gage Includes: Installation of customer specified length of lead wire Gage factor correction for lead wire desensitization Tension load application and data collection in p-strain/mV Labor for calibration and data collection Specifications subject to change without notice on account of continued product development Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 L00311 Rev. A

Dynamic Concrete Strain Gage Model CSG-3000 5/16" Diameter by 8" Long Sensor Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 L00311 Rev.