*mydirectindustry

Catalogs
Jewell Instruments
DMS Digital MEMS Inclinometer Datasheet

DMS Digital MEMS Inclinometer Datasheet

Product catalog summary

Overview: The DMS Series Digital MEMS Inclinometer is designed for industrial applications, offering both single-axis and dual-axis options. It features a resolution of 0.01° and operates effectively within a temperature range of -40° to +85°C. The device is available with RS232, RS485, and UART TTL outputs and includes a 1m cable whip.

Features & Benefits:

High resolution of 0.01° for precise measurements.
Zero temperature coefficient of ±0.01°/°C ensures stability across temperature variations.
Waterproof rating of IP67, allowing submersion up to 1m.
Customizable ranges and output types available upon request.

Applications: The inclinometer is suitable for various applications including boom position and control, radar and vehicle platform positioning, industrial measurement and control, drilling equipment, navigation pitch/roll measurement, and railway track alignment and maintenance.

Performance Specifications:

Angular range options: ±10°, ±30°, ±60°, ±90°.
Hysteresis ranges from 0.02° to 0.1° depending on the angular range.
Zero offset tolerance is consistent at 0.56° across all ranges.
Scale factor tolerance varies from 0.7% to 3%.
Warm-up time is 0.5 seconds with a time constant of 0.05 seconds.

Electrical and Environmental Specifications:

Output rates available at 5Hz, 15Hz, 35Hz, and 50Hz.
Electromagnetic compatibility adheres to EN61000 and GBT17626 standards.
Impact resistance of 100g@11ms, 3 times per axis.
Vibration resistance of 10grms, 10~1000 Hz.
Operational temperature range: -40 to +85°C; storage temperature range: -55 to +125°C.
Power requirements: 9-36 VDC @ 60mA.

Wiring Code: The wiring includes red for ground, white or yellow for RS232 (Tx) or RS485 (D-), green for RS232 (Rx) or RS485 (D+), and black for +VDC 9V~36V.

Catalog excerpts

DMS Digital MEMS Inclinometer Datasheet-1

Making Sense out of Motion... The model DMS is a mid-level performance digital MEMS inclinometer for industrial applications. Standard units are available in RS232, RS485 and UART TTL interface options. All DMS series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. Features & Benefits: • Single-Axis and Dual-axis Available • Resolution: 0.01° • Zero Temperature Coefficient: ±0.01°/°C • -40° to +85°C Operation and Storage • RS232, RS485 & UART TTL Outputs • 1m cable whip included Applications: • Boom Position and Control • Radar and Vehicle Platform Positioning • Industrial Measurement and Control • Drilling Equipment • Navigation Pitch/Roll Measurement • Railway Track Alignment & Maintentance Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955

Open the catalog to page 1

DMS Digital MEMS Inclinometer Datasheet-2

'iBUJGlI Instruments Making Sense out of Motion... Performance SpecificationsSTATIC/DYNAMIC Angular Range, ° ±10° ±30° ±60° ±90° Notes: * - Custom ranges available, please see model number structure below. Specifications subject to change without notice on account of continued product development. Rev I Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 Page 2 of 3

Open the catalog to page 2

DMS Digital MEMS Inclinometer Datasheet-3

Making Sense out of Motion... Part Numbers NOTE: If ATP report is required, please add "-ATP" to model & part numbers. Additional charges will apply Rev I Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 Page 2 of 3

Open the catalog to page 3

DMS Digital MEMS Inclinometer Datasheet

DMS Digital MEMS Inclinometer Datasheet

Catalog excerpts

All Jewell Instruments catalogs and technical brochures