*mydirectindustry

Catalogs
Jewell Instruments
DML Digital MEMS Inclinometer Datasheet

DML Digital MEMS Inclinometer Datasheet

Product catalog summary

Overview: The DML Series is a low-cost digital MEMS inclinometer designed for industrial applications. It offers both single-axis and dual-axis options with a resolution of 0.05° and operates within a temperature range of -40° to +85°C. The device is available with digital RS232, RS485, or UART TTL outputs and includes a 1m cable whip.

Features & Benefits:

Resolution of 0.05° ensures precise measurements.
Zero temperature coefficient of ±0.02°/°C enhances accuracy across temperature variations.
Waterproof rating of IP67 allows for submersion up to 1m.
Customizable ranges and output types are available upon request.

Applications: The inclinometer is suitable for various applications including solar tracking, vehicle wheel alignment, industrial automation, radar/antenna mast alignment, platform leveling, and navigation pitch/roll measurement.

Performance Specifications:

Angular range options: ±10°, ±30°, ±60°, ±90°.
Hysteresis ranges from 0.1° to 0.2° depending on the angular range.
Zero tolerance is consistent at 0.56° across all models.
Scale factor tolerance varies from 0.7% to 3%.
Warm-up time is 0.5 seconds with a time constant of 0.05 seconds.

Electrical and Environmental Specifications:

Power requirements: 9-36 VDC at 60mA.
Temperature ratings: operational from -40 to +85°C and storage from -55 to +100°C.
Impact resistance: 100g at 11ms, 3 times per axis.
Vibration resistance: 10grms from 10 to 1000 Hz.
Output rates available at 5Hz, 15Hz, 35Hz, and 50Hz.
Complies with EN61000 and GBT17626 standards for electromagnetic compatibility.

Wiring Code: The wiring includes red for ground, yellow for RS232 (Tx) or RS485 (D-), green for RS232 (Rx) or RS485 (D+), and black for +VDC (9V~36V).

Catalog excerpts

DML Digital MEMS Inclinometer Datasheet-1

DML Series - Low Cost Digital MEMS InclinometerMaking Sense out of Motion... The Jewell Instruments model DML is a low cost digital MEMS inclinometer for industrial applications. Units are available with RS232, RS485 and UART TTL output options. All DML series inclinometers are rated IP67 for waterproofing up to 1m. Custom ranges and output types are also available on request. Features & Benefits: • Single-Axis and Dual-Axis Available • Resolution: 0.05° • Zero Temperature Coefficient: ±0.02°/°C • -40° to +85°C Operation and Storage • Digital RS232, RS485 or UART TTL Outputs • lm cable whip included Applications: |— • Solar Tracking & Panel Positioning • Vehicle Wheel Alignment • Industrial Automation & Control • Radar/Antenna Mast Alignment • Platform Leveling • Navigation Pitch/Roll Measurement Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955

Open the catalog to page 1

DML Digital MEMS Inclinometer Datasheet-2

DML Series - Low Cost Digital MEMS Inclinometer Making Sense out of Motion... Notes: * - Custom ranges available, please see model number structure below. Specifications subject to change without notice on account of continued product development. STATIC/DYNAMICRev J Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 Page 2 of 3

Open the catalog to page 2

DML Digital MEMS Inclinometer Datasheet-3

DML Series - Low Cost Digital MEMS Inclinometer Making Sense out of Motion... Part Numbers NOTE: If ATP report if required, please add "-ATP" to model &. part numbers. Additional charges witL apply Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 Page 3 of 3

Open the catalog to page 3

DML Digital MEMS Inclinometer Datasheet

DML Digital MEMS Inclinometer Datasheet

Catalog excerpts

All Jewell Instruments catalogs and technical brochures