AIR-1000 Series Inclinometer Angle Readout The Jewell AIR-1000 is a microprocessor based panel meter designed to take the output from Jewell’s gravity referenced inclinometers and display it as an angle. The compact unit provides the ±15VDC sensor excitation, conditions the inclinometer output and displays the angle down to 0.001 degrees. An RS232 output is provided for interfacing to a computer, PLC or printer. Bezel and scratch resistant lenses are sealed to meet requirements of NEMA 4 and a gasket is supplied to seal the unit to a panel. AIR-1000 Series Inclinometer Angle Readout Specifications Features Ø Splash Proof Bezel Ø Heavy Duty Aluminum Case Ø Front Panel Switches for Programming and Calibration Ø 4 ½ Digits, 0.56 “ LED Readout with Negative Indication Ø Two Set-Points with Relay Closures Ø Short Case, Only 4” Behind Panel Depth Ø Programmable for Different Range Inclinometers Ø RS232 Interface Ø 0 to 10VDC Analog Output Ø ±15 VDC Sensor Excitation Performance Display 4 ½ digit, seven segment red LED 0.56 inches high Full Scale ±0.01% of reading ±2 counts of LSD up to 60.00° ±0.1% of reading ±2 counts of LSD from 60.00° to 89.00° Polarity Indication Resolution , Auto-Ranged up to 50% of span from single front panel switch Analog Output Analog to Digital Conversion Technique ASCII RS232 Serial Interface Format 1 start bit, 8 data bits, 1 stop bit, no parity bits Baud Rates, Programmable Electrical Input Voltage Input Current Inclinometer Excitation Environmental Temp Range, Operating Temp Range, Survival Relative Humidity

Available Options (Consult Factory for Pricing) RS485 Interface 4-20mA Output 5VDC Input Power 9-18VDC Input Power 18-36VDC Input Power 230VAC Input Power JEWELL INSTRUMENTS, LLC 850 PERIMETER ROAD ( MANCHESTER, NEW HAMPSHIRE 03103 USA TOLL FREE: 800 227-5955 ( TEL: 603 669-6400 ( FAX: 603 669-5962 EMAIL: [email protected] ( WEB: www.jewellinstruments.com