Catalogs >
Jewell Instruments >
A904 Clinometer Pak Datasheet

A904 Clinometer Pak Datasheet
2Pages

Catalog excerpts

Model A904 Clinometer Pak The model A904 “Clinometer Pak” is a low cost biaxial inclinometer housing a rugged weatherproof enclosure. Units are available in +/-2.5V or 0-5V DC output. All A904 Clinometers are IP65 waterproof, and powerful on-board electronics will drive cables over 500 meters. Use the model A904 and for industrial pitch and roll measurements, platform position and control, geotechnical monitoring and more. Units come standard with 3m cable pigtail; for longer lengths please specify per order. Angular Range 1 Resolution Repeatability 2 Scale Factor 3 Non-Linearity Output Channels Kz Coefficient Ks Coefficient Time Constant Natural Frequency Output Impedance Power Environmental Dimensions, Weight Materials Standard Wide-Angle ±25° ±50° 0.01° 0.02° 0.02° 0.02° 10°/V 25°/V 2.5% 7% ±2.5 VDC or 0-5 VDC X-tilt, Y-tilt, Temperature ±10 arcsec/C (typical) ±0.03%/C (typical) 0.15 sec 10 Hz 270 ohms, short circuit protected +8 to +24 VDC (bipolar output); +10.5 to +26.5 VDC (0-5V output); 7mA, 250 mV ripple max, reverse polarity protected Operating: -40 to +80 C Storage: -40 to +85 C 0-90% humidity 120 x 80 x 60 mm, 0.4 kg (1 lb.) Die-cast aluminum, painted *Specifications subject to change without notice on account of continued development; 1Resolution calculated at 1mV; 2Linear scale factor calculated from BFSL through calibration curve; 3Linearity calculated as max % deviation from BFSL. 0.05% linearity achievable using a polynomial Ordering Code: Pin-out/Wiring: Color Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 sales@jewellinstruments.com • www.jewellinstruments.com • Tel (800)

Open the catalog to page 1