JX3-DO16 Digital Output Module
136Pages

Digital Output Module

Item # 60874420 Revision 2.35.4 September 2013 / Printed in Germany This document has been compiled by Jetter AG with due diligence, and based on the known state of the art. In the case of modifications, further developments or enhancements to products shipped in the past, a revised document will be supplied only if required by law, or deemed appropriate by Jetter AG. Jetter AG shall not be liable for errors in form or content, or for missing updates, as well as for damages or disadvantages resulting from such failure. The logos, brand names, and product names mentioned in this document are...

Introduction How to contact us: Jetter AG Graeterstrasse 2 71642 Ludwigsburg Germany Phone - Switchboard: Phone - Sales: Phone - Technical Hotline: E-mail - Sales: E-mail - Technical Hotline: This Application Note is an integral part of JX3-DO16: Type: Serial #: Year of manufacture: Order #: To be entered by the customer: Inventory #: Place of operation:

Significance of this Application Note This document is an integral part of the JX3-DO16:  Keep this document in a way that it is always at hand until the JX3-DO16 will be disposed of.  Pass this document on, if the JX3-DO16 is sold or loaned/leased out. In any case you encounter difficulties to clearly understand this document, please contact Jetter AG. Jetter AG would appreciate any suggestions and contributions on your part and would ask you to contact Jetter AG at the following e-mail address: info@jetter.de. This will help the documentation department produce documents that are more...

Safety instructions Product description and equipment configuration Initial commissioning

Detecting faults

Safety instructions Safety instructions This chapter informs the user of general safety instructions. It also warns of residual dangers, if applicable. This chapter also contains information on EMC.

Basic Safety Instructions Introduction This device complies with the valid safety regulations and standards. Jetter AG attaches great importance to the safety of the users. Of course, the user should adhere to the following regulations:  Relevant accident prevention regulations;  Accepted safety rules;  EC guidelines and other country-specific regulations Intended conditions of use Usage according to the intended conditions of use implies operation in accordance with this Application Note. The JX3-DO16 has been designed as a peripheral module for use in machines and is intended for...

Safety instructions Any modifications to the device not expressly authorized by Jetter AG will result in a loss of any liability claims to Jetter AG. The original parts are specifically designed for the device. Parts and equipment from other manufacturers are not tested, and therefore not released by Jetter AG. The installation of such parts may impair the safety and the proper functioning of the device. Any liability on the part of Jetter AG for any damages resulting from the use of non-original parts and equipment is excluded. The JX3 module contains electrostatic sensitive components...

Instructions on EMI Noise immunity of a system The noise immunity of a system depends on the weakest component of the system. For this reason, correct wiring and shielding of cables is of paramount importance. Measures for increasing EMI in electric plants:  The module JX3-DO16 must be attached to a DIN rail acc. to EN 50022-35 x 7.5.  Follow the instructions given in Application Note 016 "EMC-Compatible Installation of the Electric Cabinet" published by Jetter AG. The following instructions are excerpts from Application Note 016:  Maintain physical separation between signal and power...

Product description and equipment configuration Product description and equipment configuration This chapter covers the design of the device, as well as how the order reference is made up including all options.

2 Product description and equipment configuration Product description – JX3-DO16 The JX3-DO16 module The JX3-DO16 module is a peripheral module for connection of digital actuators. This module is equipped with 16 digital outputs. Product features The features of this product are listed below: Additional features 16 digital outputs Output voltage: DC +24 V Output current: 0.5 A Short-circuit proof Color of LED membrane: traffic red (RAL 3020) Additional features of the JX3-DO16 module are:  Short-circuit detection  Output of error conditions  Pulse width modulation (PWM) which can be...

Product description and equipment configuration JX3 modules: List of documentation Introduction Various documents and software tools will support the user when engineering, installing and programming the JX3-DO16 module. These documents and software tools can be downloaded from the Jetter AG homepage http://www.jetter.de. When performing engineering tasks, the following documents and files will support you: Data sheet on the JX3-DO16 module Product description Technical specifications Dimensional drawings User manual on the JX3-DO16 module dxf file with 2D illustrations stp file with 3D...

2 Product description and equipment configuration The following document will support you in installing modules: Installation Instruction It is included in the boxed module JX3-DO16 and contains information on: Installation of the module on a DIN rail Terminal assignment Specification of conductor terminals Diagnostics via LEDs User manual on the JX3-DO16 module The following documents and software tools will support you in programming the module: User manual on the JX3-DO16 module JX2-I/O system - User information Module numbering system Diagnostics of the modules on the JX2 system bus...

Product description and equipment configuration Parts and interfaces of the JX3-DO16 module Parts and interfaces The illustration below shows the parts and interfaces of the JX3-DO16 module: Upper latch Lets you remove the JX3 module enclosure from the JX3 backplane module Support and connection device Connector for additional JX3 modules Can be removed from the JX3 backplane module For removing the JX3 module from the DIN rail. Lower latch Lets you remove the JX3 module enclosure from the JX3 backplane module Terminal of digital outputs OUT 9 ... 16 Terminal of digital outputs OUT 1 ... 8...