Summary of Airflow and Pressure Drop Data

This document appears to present data related to airflow measurements and corresponding pressure drops across a system, likely involving a fan or ventilation component.

Key Parameters

• Airflow (CFM): Values range from 70 to 560 cubic feet per minute, increasing in increments of 70.
• Pressure Drop (Inches WG): Corresponding pressure drops are listed, starting at 0 and increasing approximately by 1.6 inches water gauge (WG) per 70 CFM increment, up to 9.6 inches WG at 490 CFM.

Data Interpretation

The data suggests a linear relationship between airflow and pressure drop, indicating that as airflow increases, the pressure drop across the system increases proportionally. This is typical in duct or filter performance curves.

Implications and Recommendations

• System design should account for increasing pressure drops at higher airflow rates to ensure adequate fan capacity.
• Regular monitoring of pressure drop can help identify system blockages or filter clogging.