Catalogs >
Jet Line Engineering >
Seam Trackers, Cyclomatic Standard and Programmable

Seam Trackers, Cyclomatic Standard and Programmable
4Pages

Catalog excerpts

Seam Trackers, Cyclomatic Standard and Programmable - 1

Ε Two models available - standard and programmable; in 40 lb & 250 lb weight capacities Improves quality via constant torch to weld joint orientationՕ GMAW, FCAW, SAW applications Precise, tracking accuracy up to ձ0.005 inch (0.1 mm) Tracks single pass fi llet and groove weldsՕ Controls and slides are backward com-patible with older Cyclomatic models Value - The programmable PTST model can operate as a weld system controller Օ Performance - The PTST model stores up to 19 weld programs, each consisting of up to 8 sequential steps > ModelPTST40 3x3 & TST40 3x3PTST250 & TST250 (5x5 and 10x10) Load Capacity40 lb (18 kg)250 lb (113 kg) CG Distance from faceplate6 (152 mm)12Ԕ (305 mm) Standard Stroke3 x 3Ԕ (76 mm)5 x 5Ԕ (127 mm) and 10 x 10Ԕ (254 mm) Min. Envelope Full Std. Stroke12 (305 mm) diameter17Ԕ (431 mm) diameter Tracking AccuracyWithin 0.005 (0.13 mm)Within 0.005Ԕ (0.13 mm) Max. Cross Slide Slew Std. Rate24 IPM (0.6 mm)25 IPM (0.63 mm) Tracking Controls ManualUp/Down and Left/RightUp/Down and Left/Right Tracking Controls AutomaticLeft/Right Sidetrack and OffLeft/Right Sidetrack and Off Input Power115/220VAC, 1 Phase, 50/60 Hz115/220VAC, 1 Phase, 50/60 Hz Cross Slide Cable10 ft (3 m) standard10 ft (3 m) Omni-Guide Cable4 ft (1.2 m)4 ft (1.2 m) Power Cable6 ft (1.8 m)6 ft (1.8 m) Pendant Cable10 ft (3 m)10 ft (3 m) Standard System Weight79 lb (36 kg)105 lb (48 kg) and 118 lb (54 kg)

Open the catalog to page 1

Seam Trackers, Cyclomatic Standard and Programmable - 2

Seam Tracker Pendant 9660P or 9660S Ergonomic, light weight, easy to operate pendant. It is enclosed in a heavy-duty aluminum housing and is designed for either handheld or mounted applications. Two sealed rocker switches, joystick, and two pushbuttons provide the following features: Programmable or Standard Microprocessor Control housed in a NEMA enclosure for easy mounting near the work center. The unit has a lighted power switch and fuse holder mounted on the exterior of the unit.The control unit houses the solid-state components which provide long life and trouble-free operation. All...

Open the catalog to page 2

Seam Trackers, Cyclomatic Standard and Programmable - 3

Timed or Auto Cutoff ModeՕ Tack Cutoff (with Threshold Adjustment for tack height) Z-Search Օ Lockout Sidetrack Disable at Null Օ Vertical Search Delay Horizontal Retract Delay Օ Crater Fill DelayRemote inputs are also available offering remote start and stop functions as well as more advanced inputs such as: Null Input for synchronizing multiple control units, Vertical Auto Disable, Horizontal Auto Disable, and Cutoff. Weld Time/Auto Cutoff Enable TimeՕ Overlap Time Final Time Օ Retract Time Set of Motorized Slides The cross slides are rugged, compact, and light weight units which provide...

Open the catalog to page 3