Catalogs >
Jet Line Engineering >
Mechanized Oscillator

Mechanized Oscillator
2Pages

Catalog excerpts

Mechanized Weld Oscillator Precision Arc Oscillation Independent Dwell Settings Independent Speed Settings Width & Center Adjustment Large Weight Capacity Smooth, Stable Oscillation Introduction In arc welding, the welder typically weaves the welding arc for various welding requirements. When automating the welding process, weaving or oscillation can still be a desired effect. Oscillating the arc helps with sidewall fusion, eliminates undercut, and is required when performing most overlay or cladding operations. In order to meet these welding requirements, Jetline Engineering is pleased to offer our MO-150 Mechanical Oscillator system which can easily be added to your existing weld system or included with your new Jetline system. The MO-150-5 Mechanical Oscillator is compatible with all of the following weld processes: • • • • • Plasma Transfer Arc (PTA) Gas Metal Arc Welding (GMAW/GMAWP) Plasma Arc Welding (PAW) Gas Tungsten Arc Welding (GTAW) Flux-core Arc Welding (FCAW) Features Control of the MO-150-5 mechanical oscillator system is through the 9200 analog based control. The control's micro-stepper drive uses a 10 micro-step per step resolution which results in high precision and a smooth drive motion. MO-150-5 Mechanical Oscillator System The rigid aluminum housing of the slide assembly implements a wide footprint to minimize twisting and distortion when oscillating heavy loads at higher speeds. The precision linear guide rails use ball bearing assemblies to support the platen assembly. Bellows covers provide sealed protection of the slide components from the environmental surroundings. In the manual mode, the slide can be operated as a motorized slide by utilizing the center adjustment on the 9200 control. 9200 Control The 9200 is an analog based control using a feedback potentiometer in the slide assembly for position reference. The control is designed for all arc welding processes, but due to its advanced circuitry, provides precision oscillation typically required for the GTAW and PAW processes. The 9200 control includes the following features: • • • • • • • • • Left speed control adjustment Right speed control adjustment Left Dwell adjustment Right Dwell adjustment Oscillation width adjustment Center adjustment Manual/Remote/Set-up selector switch Solid-state design Micro-stepper drive 15 Goodyear St, Irvine, California, 92618 U.S.A. • Tel: (949) 951-1515 • Fax: (949) 951-9237

Open the catalog to page 1

MO-150 MECHANIZED WELD OSCILLATOR 9200 Control Optional features: • • • • • Remote interface control board & connector Remote control pendant Step oscillation Extension interconnection cables Or special length 9256A interconnection cables 9200 Control Remote Functions: Start/Stop: Start/Stop (optional): Stop (optional): Center: Width: Speed: Dwell: Contact Closure +24 to 0 VDC +24 to 0 VDC 10K -3 wire 10K -3 wire 0 to +5 VDC (Isolated) 0 to +5 VDC (Isolated) Specifications Control Input voltage: 120/240 VAC, 1 Phase Frequency: 50/60 Hz Shipping weight: 30 lb (13.6 kg) Dimensions: 13.5"H x...

Open the catalog to page 2