xp90-50 intensifier pump
xp90-50 intensifier pump
- Heavy gauge sheet metal covers and rugged all-steel welded framework ensure durability.
- Features include a hinged cover and removable access panels for easy inspection and maintenance.
- Includes an integral hydraulic reservoir and sound insulation for quiet operation.
- Electrical enclosure is rated NEMA 12/13.
- Equipped with a high-efficiency TEFC motor and electronically shifted intensifiers.
- Includes a Wye-Delta soft start with disconnect and a 0.5-gallon high-pressure attenuator with filtration to 0.45 micron.
- Safety features include shutdown systems, an automatic safety pressure bleed-down valve, and a thermostatically controlled cooling system.
- Dual pressure set points and a Programmable Logic Controller (PLC) for operation and safety monitoring are included.
- Features an axial piston, variable displacement, pressure-compensated hydraulic pump and liquid-filled pressure gauges.
- UHP safety shielded tubing is standard.
- Advanced Controls and CE Mark are available as options.
- Dimensions: Length 72 in (1,830 mm), Width 32 in (820 mm), Height 53 in (1,350 mm).
- Approximate weight with fluid: 2,900 lbs. (1,310 kg).
- Motor output is 50 hp (37 kW) with a high-efficiency TEFC electric motor.
- Full load amps: 60 @ 460vac (60Hz), 120 @ 230vac (60Hz), 71 @ 380vac (50Hz).
- Single piston, dual plunger, reciprocating type with one intensifier.
- Operating pressure is 75,000 psi (5,200 bar) with an intensification ratio of 25:1.
- Flow rate is 0.7 gpm (2.61 lpm) with 100,000 PSI-rated fittings and tubing.
- Water type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM.
- Supply requirements: 1.4 gpm @ 40 psi (3 bar) min. / 70°F (21°C) max.
- Filtration: 1, 0.45 Micron.
- Maximum temperature: 70°F (21°C).
- Minimum: 2.5 gpm (9.5 lpm) @ Minimum 20 psi (1.3 bar).
- Heat load: 43,000 BTUs /Hour with a kidney loop cooling circuit.
- Reservoir capacity: 36 gallons (136 liters) with 10 Micron filtration.
- Cooling: Brazed Plate Heat Exchanger Water/Oil with optional Air/Oil exchanger.
- Ambient room temperature: 50°-100°F (10°-37°C).
- Relative humidity: Non-condensing, Maximum 95% @ 100°F.
Catalog excerpts
xp90-50 intensifier pump Construction · Heavy gauge sheet metal covers · Rugged all-steel welded framework · Hinged cover and removable access panels for convenient machine inspection and maintenance · Integral hydraulic reservoir · Sound insulated for quiet operation · NEMA 12/13 rated electrical enclosure Standard Features · High efficiency TEFC motor · Electronically shifted intensifiers · Wye-Delta soft start with disconnect · 0.5 gallon (1.9 liter) high pressure attenuator with filtration to .45 micron · Safety shutdown systems · Automatic safety pressure bleed-down valve · Thermostatically controlled cooling system · Dual pressure set points · Programmable Logic Controller (PLC) for operation and safety monitoring · Axial piston, variable displacement, pressure-compensated hydraulic pump · Liquid filled pressure gauges · UHP safety shielded tubing Optional Features · Advanced Controls · CE Mark Low-Pressure Water/Intensification Water Physical Size · Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM · Supply Requirements: 1.4 gpm @ 40 psi (3 bar ) min. / 70°F (21°C) max. · Filtration: 1, .45 Micron · Length: 72 in (1,830 mm) · Width: 32 in (820 mm) · Height: 53 in (1, 350 mm) · Approximate Weight with Fluid: 2,900 lbs. (1310 kg) Coolant Water Electric Motor · Maximum Temperature: 70°F (21°C) · Minimum: 2.5 gpm (9.5 lpm) @ Minimum 20 psi (1.3 bar) · Heat Load: 43,000 BTUs /Hour · Cooling Circuit: Kidney Loop · Motor Output: 50 hp (37 kw) · Motor Type: High Efficiency TEFC electric motor · Full load amps @ 460vac (60Hz): 60 · Full load amps @ 230vac (60Hz): 120 · Full load amps @ 380vac (50Hz): 71 · Reservoir Capacity: 36 gallons (136 liters) · Filtration: 10 Micron · Cooling: Brazed Plate Heat Exchanger Water/Oil · Optional Cooling: Exchanger: Air/Oil · Type: Single piston, dual plunger, reciprocating · Number of Intensifiers: one · Operating Pressure: 75,000 psi (5200 bar) · Intensification Ratio: 25:1 · Flow Rate: 0.7 gpm (2.61 lpm) · 100,000 PSI-rated fittings and tubing · Ambient Room Temperature: 50°-100°F (10°-37°C) · Relative Humidity: Non-condensing, Maximum 95% @ 100°F Specifications subject to change.
Open the catalog to page 1All JET EDGE catalogs and technical brochures
ROBOTIC WATERJET SWIVEL1 Page
CONTACT HEIGHT SENSOR1 Page
IN-LINE WATER JET CHILLER2 Pages
TACH-JET® Waterjet System2 Pages
ip60-30 intensifier pump1 Page
FARM-JET® Waterjet System2 Pages
CUSTOM WATERJET SOLUTIONS8 Pages
WATERJET PIPE CUTTER1 Page
ECO-JET PTO Pump1 Page
Water Jet Pipe Cutter1 Page
EDGE X-5 5-axis waterjet1 Page
BOSS-CUTTER Waterjet1 Page
eco-jet-direct1 Page
waterjet-slitter11 Page
water-jet-pump-ip36-501 Page
water-jet-pumps-iP55-2001 Page
P60-100-waterjet1 Page
water-jet-pumps-ip55-751 Page
waterjet-pump-xp-90-5011 Page
ersacutter-waterjet-cutter3 Pages
deckblaster51 Page
Rail-Gantry1 Page
garnet-delivery-systems1 Page
waterjet-pneumatic-drill1 Page
aquavision-di-high-rail11 Page
waterjet-cutting-head1 Page
waterjet-cutting-head1 Page
waterjet-slitter1 Page
Mobile System Components1 Page
- Industrial pump
- Pump with electric motor
- Stationary pump
- Seawater pump
- Cutting system
- Self-priming pump
- Metal cut-off machine
- Water valve
- CNC cutting center
- Pneumatic valve
- Regulating valve
- Automatic cut-off machine
- Cutting machine for industrial applications
- Chiller
- Sheet metal cutting machine
- High-precision cutting center
- Piston pump
- 380 V pump