WATERJET SYSTEMS INTENSIFIER PUMP • Heavy gauge sheet metal covers • Rugged all-steel welded framework • Hinged cover and removable access panels for convenient machine inspection and maintenance • Integral hydraulic reservoir • Sound insulated for quiet operation • NEMA 12/13 rated electrical enclosure Standard Features • High efficiency TEFC motor • Electronically shifted intensifies • Wye-Delta soft start with disconnect • 0.5 gallon (1.9 liter) high pressure attenuator with • Safety shutdown systems • Automatic safety pressure bleed-down valve •Thermostatically controlled cooling system • Dual pressure set points • Programmable Logic Controller (PLC) for operation and safety mon • Axial piston, variable displacement, pressure-compensated hydrau • Liquid filled pressure gauges • UHP safety shielded tubing Physical Size • Approximate Weight with Fluid: 2,700 lbs. (1,230 kg) Electric Motor • Motor Type: High Efficiency TEFC electric motor • Full load amps @ 460vac (60Hz): 58 • Full load amps @ 230vac (60Hz): 116 • Full load amps @ 380vac (50Hz): 71 •Type: Single piston, dual plunger, reciprocating • Rated Pressure: 90,000 static psi (6,200 bar) • Maximum Rated Orifice Size .011 in (.28mm) • 100,000 PSI-rated fittings and tubing • Supports 75K+continuous operating pressure Low-Pressure Water/Intensification Water •Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM Coolant Water • Ability to Remove: 39,000 BTUs /Hour • Cooling Circuit: Kidney Loop • Reservoir Capacity: 45 gallons (170 liters) • Cooling: Brazed Plate Heat Exchanger Water/Oil • Optional Cooling: Exchanger: Air/Oil • Ambient Room Temperature: 50°-95°F (10°-35°C) • Relative Humidity: Non-condensing, Maximum 95% @ 100°F MADE INTHE Specifications subject to change.