cyclone abrasive removal system Waterjet Cyclone Specifications • 1 yard hopper and 1 yard abrasive bags. • Standard outlet electrical supply (120 Vac at 60 Hz standard; 100–240 Vac at 50Hz or 60Hz available) • Shop air supply, 80-120 psi, 14 cfm at 85 psi. • 60 gpm maximum water flow rate. • Only 25 sq. ft. required floor space. • Removes up to 10 lbs of abrasive per minute. • Gravity-return overflow from the abrasive holding tank. Advantages • Cleaner and easier than shoveling out your tank. • Operates unattended. • Full abrasive bags are removed and handled by a forklift. • Less expensive than pumping or shoveling out your tank. • No machine down-time required to remove abrasive. • Can be custom sized for use on any waterjet tank. • Very low maintenance costs. • Two accessible check valves are the only moving parts that come into contact with the abrasive slurry. • Easy to set up and operate. Options Use attachments to remove abrasives from a waterjet tank that is already full. • Install an agitation and suction plumbing system in an empty catch tank to keep it clean and keep up with abrasive use.