MADE INTHE Model iP55-200 Intensifier Pump • Heavy gauge sheet metal covers • Rugged all-steel welded framework • Hinged cover and removable access panels for convenient machine inspection and maintenance • Integral hydraulic reservoir • Sound insulated for quiet operation • NEMA 12/13 rated electrical enclosure Standard Features • High efficiency TEFC motor • 1,500 or 1,800 nominal motor speed (rpm) • Electronically shifted intensifiers • Wye-Delta soft start with disconnect • 0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtration • Safety shutdown systems • Automatic safety pressure bleed-down valve • Thermostatically controlled cooling system • Programmable Logic Controller (PLC) for operation and safety monitoring • Axial piston, variable displacement, pressure-compensated hydraulic pump • Liquid-filled pressure gauges • UHP safety shielded tubing Physical Size • Approximate Weight with Fluid: 6,200 lbs. (2,812 kg) Electric Motor • Motor Type: High Efficiency TEFC electric motor • Full load amps @ 460vac (60Hz): 233 • Full load amps @ 230vac (60Hz):466 • Full load amps @ 380vac (50Hz):280 • Type: Single piston, dual plunger, reciprocating • Maximum Rated Orifice Size .028 in (.71 mm) Low-Pressure Water/Intensification Water Coolant Water • Ability to Remove: 175,000 BTUs/Hour • Heat Exchanger: Shell and Tube (2) • Reservoir Capacity: 95 gallons (361 liters) • Filtration: Full Flow 10 Micron • Ambient Room Temperature: 50°-100°F (10°-37°C) • Relative Humidity: Noncondensing,Maximum 95% @ 100°F Specifications Subject to Change