WATERJET SYSTEM Designed especially for rural environments with limited electrical service, Jet Edge’s TACHJET® uses a tractor or skid steer’s hydraulic circuit to produce a 40,000 psi (2800 bar) waterjet. The TACH-JET waterjet system cuts parts up to 6” thick from virtually any material. The TACH-JET is available in two sizes: 40” x 40” (1000 mm x 1000 mm) and 60” x 60” (1500 mm x 1500 mm). It can be configured for both abrasive waterjet cutting and water-only cutting (abrasive is added when cutting harder materials such as metal; softer materials such as foam can typically be cut with water only). It requires a hydraulic power unit capable of a minimum output of 50 HP (must be capable of supplying continuous 2400 psi (165 bar) fluid at 21 gpm (79 lpm), a 120 V 60 Hz Power Source, Fresh Water Source and Suitable Tractor or skid steer (supplied by customer). STANDARD FEATURES • 3-Axis Motion System: Model 1000: 40”x40” (1000 mm x 1000 mm) Model 1500: 60” x 60” (1500 mm x 1500 mm) • Jet Edge ECO-JET TACH Direct Drive Waterjet Pump • Operate with a Windows® PC (customer supplied) • FlashCut Pro-Series Stepper Controller and FlashCut CNC software • IGEMS CAD/CAM software • Cut Parts from Virtually Any Material • No Heat, Flames or Noxious Fumes • Fast Setup and Minimal Fixturing • Make Needed Parts Now - Why Wait Days or Weeks? • Create a New Revenue Source Power Requirements ECO-JET TACH Pump: Hydraulic power unit capable of a minimum output of 50 HP (must be capable of supplying continuous 2400 psi fluid at 21 gpm) Motion System: 115v 60 Hz or 230v 50Hz Use Genuine Jet Edge Parts Work Safely See product manual for important safety precautions. W ATER WILL CUT VIRTUALLY ANYTHING...INCLUDING COSTS. 7/22/2014 Specifications Subject to Change.

WATERJET SYSTEM Motion System 6 Inch (152 mm) Z Axis Jet Edge ECO-JET TACH Pump 55,000 PSI (3800 Bar) 6 Inch Motorized Z Axis Hand-Held Pendant for Convenient Operation SPECIFICATIONS Footprint Model 1000: Width Excluding HP Gauge: 5’ 8” (1768 mm) Depth Including Whip: 7’ 7” (2347 mm ) Height Including Whip: 9’ 5” (2896 mm) Model 1500: Width Excluding HP Gauge: 6‘ 6“ (2027 mm) Depth Including Whip: 9’ 4” (2865 mm) Height Including Whip: 9’ 5” (2896 mm) Model 1000: Estimate Dry: 1800 lbs (816 kg) Estimate Wet w/o Abrasive: 4600 lbs (2086 kg) Model 1500: Estimate Dry: 2060 lbs ( 934.4 kg) Estimate...