spyder abrasivejet cutting system A Cut Above Suitable for any environment: • Cuts virtually any material without heat or flames • Pneumatic reversible drive motor • Non-ferrous motion components Movement Speed: Varies due to several ranges of gear reducers Track Options: • 3, 5 and 10 linear-foot tracks • Low profile, rigid and vacuum tracks available • Pipe track: 6–60 inches (152–1524 mm) Optional Radius & Circle Cutting Fixture: • 1”-6.5” insider diameter/16“-48” outside diameter • 3“-12.5” inside diameter/27.5“-56” outside diameter Spyder Control Station • Three-position directional valve for pneumatic drive unit • Dual air regulators for directional speed control • Control abrasive flow from console • One palm button shuts o UHP water and abrasive Spyder Vacuum Generator • Steel construction • Pneumatic control vacuum • Locking quick disconnects • Lightweight compact design Spyder Head Manipulator • Drive unit adapts for use with track or pipe cutting bands • Pneumatic reversible drive motor with interchangeable gear drive • Precise speed control for accurate cutting feed rates • Center line mounting of abrasive cutting head • Adjustable angle for beveling cuts Permalign II Abrasive Head Length 10.94 in (27.8 cm) Weight 4.00 lbs ( 1.8 kg) Operating air pressure (min) 60 psi (4 bar) Water pressure (max) 60,000 psi (4100 bar) Orifice range .005 - .021 in (.127 - .53 mm) Nozzle range .020 - .065 ID (.508 - 1.65 mm) Max flow rate 2.1 gpm (7.95 lpm) Jet Edge’s Spyder Abrasivejet Cutting System is a portable linear and pipe cutting system designed for use in remote and/or potentially hazardous environments. It is ideal for cutting pipelines, steel reinforced concrete, reactor vessels and fabricated metal structures. The Spyder is a pneumatically controlled mobile waterjet system that moves along rigid, flexible or pipe tracks. Its abrasivejet cutting head can be angled for beveling cuts. An optional radius/circle fixture can be added for increased versatility. High Flow Abrasive Head (for cutting thicker material or multiple layers) Length 7.55 in (19.1 cm) Weight 4.00 lbs ( 1.8 kg) Operating air pressure (min) 60 psi (4 bar) Water pressure (max) 45,000 psi (3100 bar) Orifice range .020 - .036 in (.51 - .91 mm) Nozzle range .095 - .125 ID (2.41 - 3.18 mm) Max flow rate 5.1 gpm (19.04 lpm) Spyder Abrasive Delivery System • Lightweight durable high-impact poly design • Two-wheel pneumatic tires with rigged frame • Air-regulated metering valve • Delivery rate: up to 3 lb (1.36 kg)/minute The Spyder is powered by a Jet Edge waterjet intensifier pump. Model iP55-280DS Specifications subject to change.