Catalogs >
JET EDGE >
spyder abrasivejet circle & radius cutting system

spyder abrasivejet circle & radius cutting system
1 / 1Pages

Catalog excerpts

spyder abrasivejet circle & radius cutting system - 1

spyder abrasivejet circle & radius cutting system A Cut Above Suitable for any environment: • Cuts virtually any material without heat or flames • Pneumatic reversible drive motor • Non-ferrous motion components Easy Set Up: • Self-aligning • Lighweight suction cup mount Available in two sizes: • 1”-6.5” insider diameter/16“-48” outside diameter • 3“-12.5” inside diameter/27.5“-56” outside diameter Movement Speed: Varies due to several ranges of gear reducers Optional Linear and Pipe Cutting Tracks: • 3, 5 and 10 linear-foot tracks • Low profile, rigid and vacuum tracks available • Pipe track: 6–60 inches (152–1524 mm) Master Control Station • Three-position directional valve for pneumatic drive unit • Dual air regulators for directional speed control • Control abrasive flow from control station • One palm button shuts oﬀ UHP water and abrasives Vacuum Generator • Steel construction • Pneumatic control vacuum • Locking quick disconnects • Lightweight compact design Head Manipulator • Drive unit adapts for use with track or pipe cutting bands • Pneumatic reversible drive motor with interchangeable gear drive • Precise speed control for accurate cutting feed rates • Center line mounting of abrasive cutting head • Adjustable angle for beveling cuts Permalign II Abrasive Head Length 10.94 in (27.8 cm) Weight 4.00 lbs ( 1.8 kg) Operating air pressure (min) 60 psi (4 bar) Water pressure (max) 60,000 psi (4100 bar) Orifice range .003 - .023 in Nozzle range .020 - .065 in ID Max flow rate 2.1 gpm (7.95 lpm) High Flow Abrasive Head (for cutting thicker material or multiple layers) Length 7.55 in (19.1 cm) Weight 4.00 lbs ( 1.8 kg) Operating air pressure (min) 60 psi (4 bar) Water pressure (max) 55,000 psi (3800 bar) Orifice range 0.023-0.042 in Nozzle range 0.095-0.125 in ID Max flow rate 5.1 gpm (19.04 lpm) Abrasive Delivery System • Lightweight durable high-impact poly design • Two-wheel pneumatic tires with rugged frame • Air-regulated metering valve • Delivery rate: up to 3 lb (1.36 kg)/minute Designed for use in remote and potentially hazardous environments, Jet Edge’s Spyder Abrasivejet Radius and Circle Cutting System can be set up on the side of tanks, small vessels and large diameter piping. It is held in place by vacuum cups and features a self-aligning centering pin for fast and reliable setup. Motion components are made from non-ferrous materials, and cutting head manipulators are powered by pneumatic motors, making the Spyder suitable for use in all environments. A master control panel allows operators to control the cutting head manipulators, direction, speed of travel, abrasive delivery and vacuum components from one location. powered by jet edge! The Spyder is powered by a Jet Edge waterjet intensifier pump. Model iP55-280DS

Open the catalog to page 1