*mydirectindustry

Catalogs
JET EDGE
P60-100-waterjet

P60-100-waterjet

Product catalog summary

Overview: The document provides technical specifications for the IP60-100 intensifier pump, manufactured by Jet Edge. It includes details on water requirements, hydraulic systems, environmental conditions, construction features, standard features, physical dimensions, and motor specifications.

Water Specifications:

Low-Pressure Water: Requires pretreated water with less than 100 TDS, pH between 6-8, and silica less than 15 PPM. Supply needs are 4.0 gpm at 20 psi, with a maximum temperature of 75°F. Filtration levels are 10, 1, and 0.45 microns.
Coolant Water: Maximum temperature is 70°F, with a minimum flow of 10.0 gpm at 30 psi. The system can remove 97,000 BTUs per hour using a brazed plate heat exchanger.

Hydraulics:

Reservoir capacity is 60 gallons, with 10-micron filtration and bladder-type accumulators.

Environmental Conditions:

Operates in ambient temperatures of 50°-100°F and non-condensing relative humidity up to 95% at 100°F.

Construction:

Features heavy gauge sheet metal covers, a rugged all-steel welded framework, and hinged covers for easy maintenance. Includes an integral hydraulic reservoir and optional sound insulation package. The electrical enclosure is NEMA 12/13 rated.

Standard Features:

Equipped with a high-efficiency TEFC motor, Wye-Delta soft start, PLC for operation and diagnostics, electronically shifted intensifiers, safety shutdown systems, and a thermostatically controlled cooling system. It also includes a 0.5-gallon high-pressure attenuator and in-line UHP water filter to 5 microns.

Physical Dimensions:

Measures 86 inches in length, 40 inches in width, and 55 inches in height, with an approximate weight of 4,600 lbs including fluid.

Electric Motor:

100 hp high-efficiency TEFC electric motor with full load amps of 119 at 460vac, 238 at 230vac, and 147 at 380vac.

Intensifier:

Single piston, dual plunger, reciprocating type with two intensifiers. Rated pressure is 60,000 psi with an intensification ratio of 20:1 (19:1 at 50Hz) and a flow rate of 2.0 gpm. Maximum rated orifice size is 0.021 inches.

Catalog excerpts

WATERJET SYSTEMS • Heavy gauge sheet metal covers • Rugged all-steel welded framework • Hinged cover and removable access panels for convenient machine inspection and maintenance • Integral hydraulic reservoir • Optional Sound Insulation Package • NEMA 12/13 rated electrical enclosure Standard Features • High efficiency TEFC motor • 1,500 or 1,800 nominal motor speed (rpm) • Wye-Delta soft start with disconnect • Programmable Logic Controller (PLC) for operation • Electronically shifted intensifies • Safety shutdown systems • Automatic safety pressure bleed-down valve • Axial piston, variable displacement, pressure-compensated hydraulic pump •Thermostatically controlled cooling system • 0.5 gallon (1.9 liter) high pressure attenuator • In-line UHP Water Filter to 5 Micron • UHP safety shielded tubing • Liquid-filled pressure gauges Physical Size • Approximate Weight with Fluid: 4,600 lbs. (2087 kg) Electric Motor • Motor Type: High Efficiency TEFC electric motor • Full load amps @ 460vac: (60Hz) 119 • Full load amps @ 230vac: (60Hz) 238 • Full load amps @ 380vac (50Hz) 147 •Type: Single piston, dual plunger, reciprocating • Maximum Rated Orifice Size: .021 in (0.53 mm) INTENSIFIER PUMP Low-Pressure Water/Intensification Water •Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM Coolant Water • Ability to Remove: 97,000 BTU's/hour • Heat Exchanger: Brazed Plate • Reservoir Capacity: 60 gallons (230 liters) • Bladder type accumulators •Ambient Room Temperature: 50°-100°F (10°-37°C) Relative Humidity: Noncondensing, Maximum 95% < MADE INTHE Specifications subject to change.

Open the catalog to page 1

P60-100-waterjet

P60-100-waterjet

Catalog excerpts

All JET EDGE catalogs and technical brochures