WATERJET SYSTEMS INTENSIFIER PUMP Low-Pressure Water/Intensification Water •Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM Coolant Water • Ability to Remove: 25,000 BTUs /Hour • Reservoir Capacity: 35 gallons (132 liters) • Filtration: Full Flow 10 Micron • Ambient Room Temperature: 50°-95°F (10°-35°C) • Relative Humidity: Non-condensing, • Heavy gauge sheet metal covers • Rugged all-steel welded framework • Hinged cover and removable access panels for convenient machine inspection and maintenance • Integral hydraulic reservoir • Sound insulated for quiet operation (optional) • NEMA 12/13 rated electrical enclosure Standard Features • High efficiencyTEFC motor • Electronically shifted intensifiers • Wye-Delta soft start with disconnect • 0.5 gallon (1.9 liter) high pressure attenuator with • Safety shutdown systems • Automatic safety pressure bleed-down valve •Thermostatically controlled cooling system • Dual pressure set points • Programmable Logic Controller (PLC) for operation and safety monitoring • Axial piston, variable displacement, pressure-compensated hydraulic pump • Liquid filled pressure gauges • UHP safety shielded tubing Physical Size • Approximate Weight with Fluid: 2,500 lbs. (1,134 kg) Electric Motor • Motor Type: High Efficiency TEFC electric motor • Full load amps @ 460vac (60Hz): 58 • Full load amps @ 230vac (60Hz): 116 • Full load amps @ 380vac (50Hz): 71 •Type: Single piston, dual plunger, reciprocating Maximum Rated Orifice Size .015 in (.38 mm) Specifications subject to change. MADE INTHE