*mydirectindustry

Catalogs
JET EDGE
IP60-50 WATERJET INTENSIFIER PUMP

IP60-50 WATERJET INTENSIFIER PUMP

Product catalog summary

Specifications:
The IP60-50 intensifier pump is designed for low-pressure water intensification. It requires pretreated water with less than 100 TDS, a pH between 6-8, and silica content below 15 PPM. The supply requirements are 1.0 gpm at 40 psi, with a maximum temperature of 70°F. Water pre-filtration is to 0.45 Micron, and in-line UHP water filtration is to 5 Micron. Coolant water must be at a maximum temperature of 70°F, with a minimum flow of 4.0 gpm at 20 psi. An external chiller with a minimum of 34,000 BTU/hour is required.

Hydraulics:
The reservoir capacity is 35 gallons, with filtration to 10 Micron.

Environmental Conditions:
The ambient room temperature should be between 50°-95°F, with non-condensing relative humidity up to 95% at 100°F.

Construction:
The pump features heavy gauge sheet metal covers, a rugged all-steel welded framework, stainless steel fittings, and components. It includes a hinged cover and removable access panels for easy inspection and maintenance, an integral hydraulic reservoir, and a NEMA 12/13 rated electrical enclosure. The electrical panel is UL Certified, with optional sound insulation.

Standard Features:
The pump includes a high-efficiency TEFC motor, electronically shifted intensifiers, a Wye-Delta motor starter assembly, a high-pressure attenuator, safety shutdown systems, an automatic safety pressure bleed-down valve, an integrated power distributor panel with disconnect, a thermostatically controlled kidney loop cooling system, dual pressure set points, a PLC for operation and safety monitoring, an axial piston hydraulic pump, a hydraulic accumulator, and liquid-filled pressure gauges.

Optional Features:
CE Mark certification is available.

Physical Size:
The pump measures 72 inches in length, 32 inches in width, and 53 inches in height, with an approximate weight of 2,500 lbs.

Electric Motor:
The motor output is 50 hp, with a high-efficiency TEFC electric motor. Full load amps are 58 at 460vac, 116 at 230vac, and 71 at 380vac.

Intensifier:
The pump uses a single piston, dual plunger, reciprocating intensifier with an operating pressure of 55,000 psi and an intensification ratio of 20:1. The flow rate is 1.1 gpm, with a maximum rated orifice size of .015 inches.

Catalog excerpts

· Heavy gauge sheet metal covers · Rugged all-steel welded framework · All stainless steel fittings and components · Hinged cover and removable access panels for convenient machine inspection and maintenance · Integral hydraulic reservoir · NEMA 12/13 rated electrical enclosure · UL Certified electrical panel · Optional sound insulation Standard Features · High efficiency TEFC motor · Electronically shifted intensifiers · Wye-Delta motor starter assembly · 1 quart (0.9 liter) high pressure attenuator · Safety shutdown systems · Automatic safety pressure bleed-down valve · Integrated power distributor panel with disconnect · Thermostatically controlled kidney loop cooling system · Dual pressure set points · Programmable Logic Controller (PLC) for operation and safety monitoring · Axial piston, variable displacement, pressure-compensated hydraulic pump · Hydraulic accumulator dampens pulsations · Liquid filled pressure gauges · UHP safety shielded tubing Optional Features · CE Mark Low-Pressure Water/Intensification Water Physical Size · Length: 72 in (1,830 mm) · Width: 32 in (820 mm) · Height: 53 in (1,350 mm) · Approximate Weight with Fluid: 2,500 lbs. (1,134 kg) · Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM · Supply Requirements: 1.0 gpm @ 40 psi (3 bar ) min. / 70°F (21°C) max. · Water Pre-filter to 0.45 Micron · In-line UHP Water Filtration to 5 Micron Electric Motor Coolant Water · Motor Output: 50 hp (37 kw) · Motor Type: High Efficiency TEFC electric motor · Full load amps @ 460vac (60Hz): 58 · Full load amps @ 230vac (60Hz): 116 · Full load amps @ 380vac (50Hz): 71 · Maximum Temperature: 70°F (21°C) · Minimum: 4.0 gpm (15.1 lpm) @ Minimum 20 psi (1.3 bar) · External Chiller Required: 34,000 BTU/hour minimum · Heat Exchanger: Brazed Plate · Reservoir Capacity: 35 gallons (209 liters) · Filtration: 10 Micron · Type: Single piston, dual plunger, reciprocating · Number of Intensifiers: one · Operating Pressure: 55,000 psi (3800 bar) · Intensification Ratio: 20:1 · Flow Rate: 1.1 gpm (4.16 lpm) · Maximum Rated Orifice Size .015 in (.38 mm) · Ambient Room Temperature: 50°-95°F (10°-35°C) · Relative Humidity: Non-condensing, Maximum 95% @ 100°F

Open the catalog to page 1

IP60-50 WATERJET INTENSIFIER PUMP

IP60-50 WATERJET INTENSIFIER PUMP

Catalog excerpts

All JET EDGE catalogs and technical brochures