WATERJET SYSTEMS • Heavy gauge sheet metal covers • Rugged all-steel welded framework • Hinged cover and removable access panels for convenient machine inspection and maintenance • Integral hydraulic reservoir • Sound insulated for quiet operation • NEMA 12/13 rated electrical enclosure Standard Features • High-efficiencyTEFC motor • 1500 or 1800 nominal motor speed (rpm) • Electronically shifted intensifiers • Wye-Delta soft start with disconnect • 0.5 gallon (1.9 liter) high pressure attenuator with 1.45 micron filtratio • Safety shutdown systems • Automatic safety pressure bleed-down valve • Thermostatically controlled cooling system • Programmable Logic Controller (PLC) for operation and safety monito • Axial piston, variable displacement, pressure-compensated hydraulic • Liquid-filled pressure gauges • UHP safety shielded tubing • TUV, TTK, ASME attenuator certifications • U/L, CU/L listed industrial control panel INTENSIFIER PUMP Physical Size • Approximate Weight with Fluid: 2000 lbs. (907 kg) Electric Motor • MotorType: High Efficiency TEFC electric motor • Full load amps @ 460vac: (60Hz) 38 • Full load amps @ 230vac: (60Hz) 76 •Type: Single piston, dual plunger, reciprocating • Maximum Rated Orifice Size: .011 in (.28 mm) Low-Pressure Water/Intensification Water •Type: Pretreated, <100TDS, PH 6-8, Silica <15PPM Coolant Water • Ability to Remove: 22,000 BTUs / Hour • Heat Exchanger: Shell and Tube (2) • Reservoir Capacity: 20 gallons (76 liters) • Filtration: Full Flow 10 Micron • Ambient Room Temperature: 50°-100°F (10°-37°C) • Relative Humidity: Noncondensing, Maximum 95% @ 100°F Specifications subject to change. MADE INTHE Dl^.igj www.jetedge.com