1. Catalogs
  2. JET EDGE
  3. IP55-280DS DIESEL WATERJET PUMP
video corpo

IP55-280DS DIESEL WATERJET PUMP

IP55-280DS DIESEL WATERJET PUMP

Product catalog summary
Overview: The document provides technical specifications for the Jet Edge model IP55-280DS intensifier pump, highlighting its physical dimensions, engine details, intensifier characteristics, water requirements, hydraulic system, fuel capacity, and safety features.
Physical Size: The pump measures 134 inches in length, 63 inches in width, and 84 inches in height, with an approximate weight of 7,700 lbs without fluids.
Engine Specifications: It is powered by a 280 hp Cummins turbo diesel engine that meets Tier 3 certification standards and includes a diagnostic message display for electronics.
Intensifier Details: The pump features a single piston, dual plunger, reciprocating intensifier with two units, operating at a nominal pressure of 55,000 psi and an intensification ratio of 12:1. It has a flow rate of 4.3 gpm (16.3 lpm) and includes a TUV certified attenuator. An optional CE Mark is available.
Water Requirements: Recommended water type is potable, with supply requirements of 4.1 gpm at 70 psi minimum and a maximum temperature of 75 degrees. It includes an in-line quad filter for filtration.
Hydraulic System: The system has a reservoir capacity of 90 gallons and uses full flow, 10-micron filtration.
Fuel Capacity: The main tank holds 90 gallons.
Safety Features: The pump includes several shut-down safety features such as low hydraulic oil level, low incoming water pressure, low charge pump pressure, clogged charge pump filter, high engine coolant temperature, low engine oil level, main hydraulic filter clogged, and high hydraulic fluid temperature.
See more

Catalog excerpts

IP55-280DS DIESEL WATERJET PUMP-1

model ip55-280ds intensifier pump Physical size · Length: 134 inches · Width: 63 inches · Height: 84 inches to top of exhaust · Approximate weight w/o fluids : 7,700 lbs Low Pressure/Intensification water · Type (recommended): Potable · Supply requirements : 4.1 gpm @ 70 psi min./75 degrees max. · Filtration: In-line quad filter Engine: · Engine output: 280 hp · Engine type: Cummins turbo diesel (meets Tier 3 certification) · Electronics: Diagnostic message display Hydraulics: · Reservoir capacity: 90 gallons · Filtration: Full flow, 10 micron Intensifier (PLC controlled) · Type: Single piston, dual plunger, reciprocating · Number: Two · Nominal operating pressure: 55,000 psi · Intensification ratio: 12:1 · Flow rate: 4.3 gpm (16.3 lpm) flow rate · Attenuator: TUV certified Optional CE Mark Available Fuel capacity · Main Tank : 90 gallons Pump shut-down safety features: · Low hydraulic oil level · Low in-coming water pressure · Low charge pump pressure · Clogged charge pump filter · High engine coolant temp · Low engine oil level · Main hydraulic filter clogged · High hydraulic fluid temperature

 Open the catalog to page 1

All JET EDGE catalogs and technical brochures

  1. deckblaster5

    1  Page

  2. Rail-Gantry

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.