In-line chiller The In-Line Chiller cools the pump hydraulics and cutting water (when used in combination with a closed-loop filtration sytem), significantly reducing water use and prolonging the life of pump components, including high-pressure seals. The In-Line Chiller also prevents pump cooling water from being lost down the drain, and keeps the catch tank water significantly cooler, reducing water loss within the closed-loop filtration system due to evaporation. Construction The In-Line Chiller utilizes a durable welded hermitic-scrolled compressor and features industrial type electrical in a Nema 12 panel. The Chiller is equipped with a digital temperature controller. Models include a vertical air discharge which minimizes worker discomfort, reduces floor space requirements, and improves the ease of ducting air flow. Removable/cleanable filters on the air intake are standard. System Benefits • Nickel-brazed heat exchanger designed to handle close-approach temperatures with efficient and reliable evaporation. • Electrical configurations for 230 volt single phase and 460 volt three phase operations. • Controls include low flow switch to prevent evaporator freeze up. • Wiring is liquid tite or sjo cord. • Refrigeration circuit includes service valves, high side filter drier, thermostatic expansion valve liquid line sight valve, high and low refrigeration charge. • Digital temperature controller, high and low side refrigeration switches and coolant flow switch. System Specifications Model

WATERJET SYSTEMS WATERJET SYSTEMS Specifications subject to change.