eco-jet PTO waterjet pump An industry-first, the Eco-Jet PTO utilizes a tractor* PTO to produce up to 1 gpm of 55,000 psi ultra-high pressure (UHP) water for precision cutting, cleaning and surface preparation applications. Unlike traditional industrial waterjet pumps, the Eco-Jet PTO requires only a standard 120 V 60 Hz power source and a suitable tractor, making it practical for farm machine shops and shops with a limited power supply. Advantages · Highly Affordable · Uses Standard Household Power · Available for 540 rpm and 1000 rpm PTO · Available for Category 1 and 2 Three-Point Hitches · Easy to maintain · Powers any manufacturer’s waterjet system!** * Tractor Sold Separately ** Waterjet table or tool must be capable of sending a pressure relief signal to the pump. Specifications Power: Output Pressure: Flow Rate: Maximum Orifice: Power Supply: LWH: Weight: 540 rpm and 1000 rpm PTO producing a minimum of 50hp 55,000 psi (3800 bar) continuous 1 GPM (3.8 L/min) .015 in (.38 mm) 120 V 60 Hz 35.75 inch x 39.54 inch x 35.43 inch (1004 mm x 908 mm x 900 mm) 580 lb (263 kg); approximate Standard Features · Attenuator to reduce pressure fluctuations · Liquid-filled pressure gauges · UHP safety shielded tubing ATTENUATOR Construction · Rugged all-steel welded framework · NEMA 12/13 rated electrical enclosure Environmental Requirements · Temperature: Above freezing to 95ºF (0º-35ºC) · Relative Humidity: Non condensing, maximum 95% at 95ºF (35ºC) Tractor Requirements · 540 rpm or 1000 rpm PTO producing a minimum of 50hp · Category 1 or 2 Three-Point Hitch PLUNGER PUMP & HIGH PRESSURE ASSEMBLY Low-Pressure Water Requirements · Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM · Supply Requirements: Feed Water: 4.5 to 5 GPM (17-19 lpm) Minimum pressure 60 psi (4.2 bar) Maximum temperature 70ºF (21ºC) · On-board filtration to 0.45 micron