1. Catalogs
  2. JET EDGE
  3. 90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump
video corpo

90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump
1 /1Page

90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump

90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump
1 /1Page

Catalog excerpts

90,000 PSI X-Stream xp90-100 Waterjet Intensifier Pump-1

xP90-100 intensifier pump Construction · Heavy gauge sheet metal covers · Rugged all-steel welded framework · Hinged cover and removable access panels for convenient machine inspection and maintenance · Integral hydraulic reservoir · Sound insulated for quiet operation · NEMA 12/13 rated electrical enclosure Standard Features · High effciency TEFC motor · 1,500 or 1,800 nominal motor speed (rpm) · Electronically shifted intensifiers · Wye-Delta soft start with disconnect · Fail-safe high-pressure attenuator · Safety shutdown systems · Automatic safety pressure bleed-down valve · Thermostatically controlled cooling system · Programmable Logic Controller (PLC) for operation and safety monitoring · Axial piston, variable displacement, pressure-compensated hydraulic pump · Liquid-filled pressure gauges · UHP safety shielded tubing Physical Size Low-Pressure Water/Intensification Water · Type: Pretreated, <100 TDS, PH 6-8, Silica <15PPM · Supply Requirements: 2.0 gpm @ 40 psi (3 bar ) min. / 70°F (21°C) max · Filtration: 10, 1, .45 Micron Electric Motor Coolant Water · Maximum Temperature: 70°F (21°C) · Minimum: 4.8 gpm (18.2 lpm) @ Minimum 20 psi (1.3 bar) · Ability to Remove: 95,000 BTUs /Hour · Cooling Circuit: Kidney Loop Hydraulics · Reservoir Capacity: 60 gallons (230 liters) · Filtration: 10 Micron · Cooling: Brazed Plate Heat Exchanger Water/Oil · Optional Cooling: Exchanger: Air/Oil · Length: 86 in (218 cm) · Width: 40 in (102 cm) · Height: 55 in (140 cm) · Approximate Weight with Fluid: 4,900 lbs. (2,222 kg) · Motor Output: 100 hp (75 kw) · Motor Type: High Efficiency TEFC electric motor · Full load amps @ 460vac: (60Hz) 119 · Full load amps @ 230vac: (60Hz) 238 · Type: Single piston, dual plunger, reciprocating · Number of Intensifers: Two · Rated Pressure: 90,000 static psi (6,200 bar) · Intensification Ratio: 25:1 · Flow Rate: 1.45 gpm (5.49 lpm) · Maximum Rated Orifice Size: 0.017” (0.43mm) · 100,000 PSI-rated fittings and tubing · Supports 75K+ continuous operating pressure Environmental · Ambient Room Temperature: 50°-95°F (10°-35°C) · Relative Humidity: Non-condensing, Maximum 95% @ 100°F

 Open the catalog to page 1

All JET EDGE catalogs and technical brochures

  1. deckblaster5

    1  Page

  2. Rail-Gantry

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.