Catalogs >
Jergens, Inc. >
Miscellaneous Fasteners Catalog

Miscellaneous Fasteners Catalog
10Pages

Catalog excerpts

MISCELLANEOUS FASTENERS Miscellaneous Fasteners MISCELL ANEOUS FA STENERS

Alloy Steel Pull Dowel Pins Jergens Offers 3 Styles of Precision Ground Pull Dowels Spiral Groove (Grooves Help to Relieve Trapped Air) Features, Applications & Benefits • Internally threaded hole allows removal of pull dowels with a standard screw. • Standard Round Pull Dowels are typically used in applications featuring a through hole. • Spiral Groove Pull Dowels feature a groove cut to allow trapped air to be released. • Flat Vent Pull Dowels feature a ground flat on one side to release trapped air. MISCELL ANEOUS FA STENERS Flat Vent (Ground Flat Helps to Relieve Trapped Air) • Spiral...

Open the catalog to page 2

SPECIALTY FASTENERS GROUP Precision Ground Pull Dowels Spiral Groove Technical Data Material: Alloy Steel Length Tolerance: ± .010" Core Hardness: 47 - 58 Rockwell C Diameter Tolerance: ± .0001" Surface Hardness: 60 - 64 Rockwell C Recommended Hole Size: .0005" under Nom. Dia. Surface Finish: 8 Micro-Inch Specification: ASME B18.8.2 Spiral Groove MISCELLANEOUS FASTENERS Flat Vent Standard Round Phone: 866-KWIK-LOK (594-5565) | Fax: +1 216-481-6193 | E-mail: fasteners@jergensinc.com | www.jergensinc.com

Open the catalog to page 3

Precision Ground Pull Dowels Stainless Steel Spiral Groove Standard Round MISCELL ANEOUS FA STENERS Internal Thread Technical Data Material: 300 Series SS (18-8) Length Tolerance: ± .010" Diameter Tolerance: ± .0001" Recommended Hole Size: .0005" under Nom. Dia. Surface Finish: 8 Micro-Inch Specification: ASME B18.8.2 (Parts are not heat treated/hardened) Spiral Groove Standard Round Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

Open the catalog to page 4

Pull DowelsMetric • Material: Low Carbon Steel • Heat Treat: Case Hardened • 3D Solid Models are available in multiple formats from www.jergensinc.com Flat ground on the side for air release in blind holes. Button head screw not included. MISCELLANEOUS FASTENERS Phone: 866-KWIK-LOK (594-5565) | Fax: +1 216-481-6193 | E-mail: fasteners@jergensinc.com | www.jergensinc.com

Open the catalog to page 5

Rod Ends Threaded • Material: Alloy Steel • Finish: Black Oxide • Heat Treat: 32-36 Rc • Thread: Class 2A-UNC I* 150,000 PSI Tensile Rod Ends are forged and finished for applications not requiring flat contact with the head. All holes are reamed. Rod Ends can be used with spherical flange assemblies, flange nuts and clamp assemblies. MISCELLANEOUS FASTENERS Rod EndsStainless Steel Part Number • Material: 303 Stainless • Thread Class 2A-UNC Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

Open the catalog to page 6

Yokes Tapped • Material: C-1021 Forging • Finish: Black Oxide • Thread: 2B Jergens offers these yokes for attaching to threaded linkage at stem end. The forged holes are reamed and faced-off parallel inside and outside the yoke ends. Part Number Part Wt. Coarse UNC Number UNF (lbs) Pitch J Fine Pitch J A B C D E F G H 10 Pcs. 45501 10-32 1 9/16 1 9/16 5/16 7/16 3/16 3/8 3/16 .21 MISCELL ANEOUS FA STENERS Threaded • Material: C-1021 Forging • Finish: Black Oxide • Thread: 2A-UNC This style yoke is similar to the above except the stem is threaded for attaching to tapped linkage. Phone:...

Open the catalog to page 7

Clevis Pins • Material: Low Carbon Steel • All Clevis Pins supplied with cotter pins. MISCELL ANEOUS FA STENERS Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

Open the catalog to page 8

Leveling Mounts • Material: 1214 Steel • Zinc plated, yellow finish • Non-Skid Material: Neoprene • Case hardened, file hard • Swivels 10° in all directions • Available with non-skid on base • Available in stainless steel, or with a delrin pad, and in larger sizes upon request. MISCELL ANEOUS FA STENERS *Add 1/8" to C Dimension for non-skid style. Across Maximum Load Part Number (lbs) Flats Standard Non-skid A B C* D E Standard Non-skid *Add 1/8" to C Dimension for non-skid style. Phone: 866-KWIK-LOK (594-5565) | Fax: +1 216-481-6193 | E-mail: fasteners@jergensinc.com | www.jergen

Open the catalog to page 9

USAE™ Heavy Duty Flat Washers MISCELLANEOUS FASTENERS USS + SAE = USAE What is a USAE' Washer? • It is a simple but effective idea that is long overdue. • The Outside Diameter conforms to USS standards. This provides a washer that is up to 36% larger than standard hardened washers. More Contact Area = More Holding Power • The Inside Diameter conforms to SAE standards. The small ID provides a more precise fit on bolts, studs, etc. • USAE Washers are also up to 37% thicker than standard hardened washers for greater strength. • Washers are made from mild steel. They are case hardened to 60 HRc...

Open the catalog to page 10