JERGENS WORKHOLDING SOLUTIONS WORKHOLDING SOLUTIONS | SPECIALTY FASTENERS | LIFTING SOLUTIONS ©2016 jergens, inc. 15700 S. Waterloo Road. Cleveland, OH 44110-3898 877.426.2504 |

Jergens Company Profile Jergens Inc. was founded in 1942 by Jack Schron, Sr. and his father Christy, to provide standard components for building jigs and fixtures. Today the fourth generation of family involvement continues stronger than ever. Throughout it’s sixty-year history the company has grown into four separate operating divisions: Tooling Component Division (TCD), Jergens Industrial Supply (JIS), Acme Industrial Company (AIC), and Advanced Systems Group (ASG) Division of Jergens. While all divisions are vital to the Jergens family, the TCD Division is the centerpiece of our manufacturing...

Jergens OK-Vise®

Jepgens. WORKHOLDING SOLUTIONS GROUP Part Number Socket Head Screw DIN 912 *DK2-VTI-S measures given in inches and pounds. Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

Single-wedge clamps are also available with extended jaws and can be machined to suit the geometry of the workpiece. The smallest model can be machined up to 3 mm and the larger ones up to 5 mm. Part Number Socket Head Screw DIN 912 *DK2-VTI+5S measures given in inches and pounds. Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: [email protected] | www.jergensinc.com

Jepgens. WORKHOLDING SOLUTIONS GROUP Additional piece models have machined female threadings (M5) for socket head screws on the side of the jaw, making it quick and easy to use various additional pieces which can also be machined into different shapes. Part Number Socket Head Screw DIN 912 Force ol Jaws kN (lbs) Ti 'orque Nm (ft/lbs) *DK2-VT-TS measures given in inches and pounds. Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP These clamps have a self-adjustable ball gripper screw inserted into a clamp jaw. The ball bearing at the end is made of steel and equipped with torsion protection, allowing the ball to self-adjust up to 9 degrees. This makes clamping irregular-shaped parts and castings more flexible Part Number Socket Head Screw DIN 912 Force of Jaws kN (lbs) *DK2-VT+E measures given in inches and pounds. Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: [email protected] | www.jergensinc.com

Jepgens. WORKHOLDING SOLUTIONS GROUP Part Number Socket Head Screw DIN 912 *DK2-WTI measures given in inches and pounds. Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

WORKHOLDING SOLUTIONS GROUP Part Number Socket Head Screw DIN 912 *DK2-WTI-S measures given in inches and pounds. Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: [email protected] | www.jergensinc.com

Economy Clamp The cost efficient choice! These models meet the demands of workholding when ultra precision and high clamping force are not necessary. They are made of the same raw material as our other models, and the bottom of the jaws are ground for precise positioning on the fixture base. AK2-VT-SO always comes with Viton o-rings. Only the bottom of the jaw is ground. Only our two smallest series clamps are available in the economy model (AK2-VT-SO). Part Number Socket Head Screw DIN 912 Clamping Force of Jaws kN (lbs) Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

Jergens. LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP Low-Profile Clamps Size Serrated basic version Smooth basic version Machinable jaws Machinable & smooth combo Mounting jaw model Mounting jaw model & smooth combo Self-adjustable model Two self-adjustable jaws Single-wedge pull-down, serrated Double-wedge pull-down, serrated Double-wedge pull-down, smooth Stainless steel model Economy-series, serrated Economy-series, smooth Metric bolt Imperial bolt Force up to kN (lbs) Clampforces LOW PROFILE CLAMPING Horizontal forces of Jergens/OK-Vise low profile clamps Phone: 877-426-2504 | Fax: +1...

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP Multi-Rail RM System Multi-Rail is the new generic-purpose workholding system of Jergens/OK-VISE. Compared to a traditional machine vise, the Multi-Rail system offers the following benefits: ██ Using the components of the system, even the most challenging workpiece types can be machined All sides of a workpiece can be machined with two setups Multiple workpieces can be clamped on the same area Workpiece will be safely fixtured It is also possible to clamp very large work pieces Multi-Rail RM System Components Phone: 877-426-2504 | Fax: +1 216-481-6193...

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP RM Application #1 (SRM-GB1) To make selection of the components easier, the Jergens/OK-Vise team has selected some basic sets to enable an easy start with the Multi-Rail system. In the pictures below you can see some solutions done with each set. ██ ██ For three-directional machining One or two workpieces can be machined at the same time Multi-Rail Base Stop Module Smooth Clamp Module D Smooth Multi-Rail Base Stop Module Smooth Clamp Module B Smooth Multi-Rail Base Stop Module Smooth Clamp Module B Smooth Multi-Rail Base Multi-Rail Base Clamp Module...

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP Multi-Rail Base Parallel Block Stop Module Smooth Clamp Module D Smooth Multi-Rail Base Stop Module Smooth Clamp Module D Smooth Multi-Rail Base Stop Module Combo V/S Stop Module Smooth Clamp Module D Smooth Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: [email protected] | www.jergensinc.com

LOW PROFILE CLAMPING WORKHOLDING SOLUTIONS GROUP Stop Module Smooth Clamp Module Smooth Multi-Rail Base Multi-Rail Base Stop Module Smooth Clamp Module Smooth Multi-Rail Base Stop Module Smooth Clamp Module Smooth Parallel Block Multi-Rail Base Stop Module Smooth Clamp Module Smooth Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA