to-use conventional style controls, making it ideal for routine and educational use. Ideal for routine and educational use Easy to use and conventional style controls Sample flexibility with many size options The 6051 is a general purpose colorimeter, equipped with easy- Wide wavelength range from 400 to 710nm Mains or battery operated Standard 10mm square cuvettes, semi-micro volume cuvettes, flow-through or pour in/suck out cells can all be used with the standard sample holder. Excellent sampling flexibility is achieved through the optional cell holder assemblies, allowing the use of 10, 20, and 40mm cells, whilst multiple sample handling is possible with the four cell carriage. For temperature-dependent measurements a heated cell block is available. Technical Specification Wavelength range 400 to 710nm Wavelength selection 8 in-built gelatin filters: 430, 470, 490, 520, 540, 580, 600 and 710nm Measurement ranges 0-100%T 0-1.50Abs 0.1 to 1000 Conc Resolution 1%T, 0.01Abs, 0.1 to 1 Conc Bandwidth Typically 40nm Blank drift 2%/hr after 15 minute warm-up Photometric linearity 1%T Light source Tungsten filament lamp Output Analogue, 10mV per digit Power 230V, 50Hz* Size (l x w x d), mm 300 x 355 x 120 Weight, kg 3 Ordering Information Part Code 6051 colorimeter supplied with 8 built in filters, 10x10mm cell holder, mains leads and plastic * Voltage variants available see page 94 Jenway Catalogue

Accessories Colorimeter Ordering Information Part Code 405nm interference filter, 10nm bandwidth 540nm interference filter, 10nm bandwidth Cells and Cuvettes Colorimeter Ordering Information Cuvettes (Left to Right) Part code: 035 086, 035 029, 035 072 Part Code 10 x 10mm 3ml plastic cuvettes (pack 100) 10 x 10mm 1.5ml plastic cuvettes (pack 100) Moulded cuvette rack for 16 10x10mm cuvettes Tungsten filament lamp Jenway Catalogue