- Catalogs
- JENOPTIK AG
- Diode Laser (Open Heat Sink Packages)
Diode Laser (Open Heat Sink Packages)
Diode Laser (Open Heat Sink Packages)
- Features: Offers 8 W continuous wave (cw) optical output power, high efficiency, low divergence, and a lifetime over 10,000 hours.
- Specifications: Maximum optical output power of 8 W, center wavelength of 808 nm, typical operation current of 8.5 A, and maximum operating voltage of 2 V.
- Cooling: Requires soldering on a cooled surface, operational temperature between 15-30°C.
- Features: Provides up to 160 W cw optical output power, high efficiency, and long lifetime.
- Specifications: Center wavelengths of 938 nm and 976 nm, typical operation currents from 125 A to 165 A.
- Cooling: Mounted via thermally conductive foil on a cooled surface, operational temperature between 15-30°C.
- Features: Delivers up to 55 W cw optical output power after collimation, high efficiency, and long lifetime.
- Specifications: Center wavelengths include 808 nm, 880 nm, 915 nm, 938 nm, and 976 nm, with typical operation currents around 59-64 A.
- Cooling: Similar mounting requirements, operational temperature between 15-30°C.
- Optical Output Power: Ranges from 50 W to 300 W depending on model and configuration.
- Center Wavelength: Varies between 807 nm and 976 nm at 25°C.
- Spectral Bandwidth: Typical FWHM is 3 nm, maximum 5 nm.
- Operation Current: Typical values range from 56 A to 275 A, maximum up to 290 A.
- Operating Voltage: Maximum ranges from 1.7 V to 2.2 V.
- Divergence: Fast axis divergence is less than 0.5°, slow axis around 6° to 8°.
- Cooling: Requires thermally conductive foil or water-cooled plates, with specific flow rate and water quality.
- High efficiency and low divergences.
- Long lifetime exceeding 10,000 hours or 1 GShot.
- Available in passively and actively cooled configurations.
- Pumping of solid-state lasers.
- Print and medical applications.
- Illumination purposes.
Catalog excerpts
Single Emitter Diode Lasers cw, passively cooled • High optical output power of 8 W cw • Pumping of solid-state lasers • High efficiency, low divergences • Print applications • Lifetime > 10,000 h, high reli
Open the catalog to page 1
Single Emitter Diode Lasers cw, passively cooled Specifications (Start of Life) JOLD-8-BAS-1E, Design 215712124 Operation Mode Maximum Optical Output Power Emitter Width Center Wavelength at 25 °C Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Typical Fast Axis Divergence FWHM Typical Fast Axis Divergence 95 % Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence 95 % Anode,...
Open the catalog to page 2
Open Heat Sink Diode Lasers cw, passively cooled • High optical output power up to 160 W cw • Pumping of solid-state lasers • High efficiency, low divergences • Print applications • Long lifetime, high reliability
Open the catalog to page 3
Open Heat Sink Diode Lasers cw, passively cooled Preliminary Specifications Operation Mode Maximum Optical Output Power Center Wavelength at 25 °C Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Typical Fast Axis Divergence FWHM Typical Fast Axis Divergence 86 % Typical Fast Axis Divergence 95 % Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence 86 % Typical Slow Axis Divergence...
Open the catalog to page 4
Open Heat Sink Diode Lasers Features: Applications: • High optical output power up to 200 W cw • Pumping of solid-state lasers • High efficiency, low divergence • Print applications • Long lifetime, high reliability • Medical applications
Open the catalog to page 5
Open Heat Sink Diode Lasers cw, passively cooled Product Order code Operating Mode Maximum Optical Output Power Maximum Optical Output Power after Collimation Center Wavelength at 25 °C Center Wavelength Tolerance at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operating Current Maximum Operating Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Fast Axis Divergence (Full Power) Typical Fast Axis Divergence FWHM Typical Fast Axis Divergence 86 % Typical Fast Axis Divergence 95 % Typical Slow Axis...
Open the catalog to page 6
Open Heat Sink Diode Lasers Features: Applications: • High optical output power up to 60 W cw, 100 W qcw • Pumping of solid-state lasers • High efficiency, low divergences • Print applications • Long lifetime > 20,000 h, high reliability • Medical applications
Open the catalog to page 7
Open Heat Sink Diode Lasers cw & qcw, passively cooled (Start of Life) Operation Mode Maximum Pulse Length / Duty Cycle Maximum Optical Output Power Center Wavelength at 25 °C Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Typical Fast Axis Divergence FWHM Typical Fast Axis Divergence 86 % Typical Fast Axis Divergence 95 % Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence...
Open the catalog to page 8
Open Heat Sink Diode Lasers cw, passively cooled • High optical output power up to 100 W cw • Pumping of solid-state lasers • High efficiency, low divergences • Print applications • Long lifetime > 20,000 h, high reliability
Open the catalog to page 9
Open Heat Sink Diode Lasers Operation Mode Maximum Optical Output Power Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Typical Fast Axis Divergence FWHM Typical Fast Axis Divergence 86 % Typical Fast Axis Divergence 95 % Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence 86 % Typical Slow Axis Divergence 95 % Anode, Cathode Connectors Operation Conditions Expected Lifetime...
Open the catalog to page 10
Open Heat Sink Diode Lasers cw & qcw, passively cooled, with collimation Design 215507226 Design 215507126 Design 215507126 - Very high optical output power up to 35 W cw, 90 W qcw - Pumping of solid-state lasers Features: after collimation Applications: - Print applications • Long lifetime > 20,000 h, high reliability cw, 90 W qcw - High optical output power up to 35 W • Pumping of solid-state lasers - Medical applications after collimation - Passively cooling • High efficiency, low divergences • Long lifetime > 20,000 h, high reliability • Print applications • Medical app
Open the catalog to page 11
Open Heat Sink Diode Lasers cw & qcw, passively cooled, with collimation (Start of Life) Operation Mode Maximum Pulse Length / Duty Cycle Max. Optical Output Power after Collimation Center Wavelength at 25 °C Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Fast Axis Divergence (Full Power) Slow Axis Divergence (Full Power) Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence...
Open the catalog to page 12
Open Heat Sink Diode Lasers cw, passively cooled, with collimation • High optical output power up to 55 W cw after • Pumping of solid-state lasers collimation • High efficiency, low divergences • Long lifetime > 20,000 h, high reliability • Print applications • Medical app
Open the catalog to page 13
Open Heat Sink Diode Lasers cw, passively cooled, with collimation (Start of Life) Operation Mode Max. Optical Output Power after Collimation Center Wavelength at 25 °C Center Wavelength Variation at 25 °C Typical Spectral Bandwidth (FWHM) Maximum Spectral Bandwidth (FWHM) Typical Operation Current Maximum Operation Current Typical Threshold Current Maximum Threshold Current Typical Slope Minimum Slope Maximum Operating Voltage Fast Axis Divergence (Full Power) Slow Axis Divergence (Full Power) Typical Slow Axis Divergence FWHM Typical Slow Axis Divergence 86 % Typical Slow Axis Divergence 95...
Open the catalog to page 14All JENOPTIK AG catalogs and technical brochures
Optoelectronic modules2 Pages
PROGRES® C14plus2 Pages
PROGRES SpeedXT core® 52 Pages
ELM-650-992-79 Pages
ELEM-DP 10k2 Pages
ELEM 10k2 Pages
JenLas® fiber ns 25 – 1052 Pages
Fiber Lasers2 Pages
Lasers for Micro Machining4 Pages
Coating of Polymer Optics2 Pages
Optical Components2 Pages
Modulators14 Pages
Lighting Solutions18 Pages
Single Emitters & Bars80 Pages
Diode Laser Modules36 Pages
Diode Laser Stacks44 Pages
Diode-Pumped Thin-Disk Lasers16 Pages
Lasers for Medicine6 Pages
- Cutting system
- Digital imager
- Visible imager
- Laser cutting machine
- Cutting machine for industrial applications
- CMOS camera module
- Industrial camera module
- LED lighting
- High-precision cutting center
- Infrared imager
- Full-color camera system
- Monitoring camera system
- Process software
- Computer-aided design software
- High-speed cut-off machine
- USB camera module
- Plastic cutting machine
- Fiber laser cutting machine
- Design software solution
- Monochrome camera module