Jekran Ltd was founded in 2011 specifically to develop and produce various types of CNC Machines. The company contains a wealth of experience with direct involvement, in the design, production, repair and use of CNC equipment for over two decades. Being based in Malta, the company is well connected to all the major European, North African and Middle-East markets. All company personnel speak English as a first language meaning excellent support and easy communication with every department within the company.

Standard features in each machine: Ridged gantry orientation reinforced with structural steel section rigorous check lists

Although the standard features are suitable for the majority of job requirements, Jekran can offer to implement various upgrades to facilitate particular requests - 3.8kW 24,000RPM ceramic bearing spindle The alternative motor gives additional power together with the possibility to install a tool magazine holder and the functionality of full automatic tool change feature - Fully or semi-automatic tool change Semi-automatic tool change feature can be added to the standard 2.2kW spindle. Tools mounted in ISO 10 tool holders can then be attached to the semi-automatic tool changer. Tool change sequence...

-Vacuum material holding system The X-MR can be equipped with a vacuum table setup to hold down the workpiece rigidly in place without the additional need to fasten this to the worktable. A central vacuum blower is controlled via various control valves which regulate the suction pressure in the respective working area pockets. This greatly facilitates preparation time and avoids tool breakage nuisance with the workpiece mounting screws. - Servo driven axis Thousands of calculations per second provide feedback to the CNC determine if the movement is being translated to the desired motion. Instantaneous...

Sv^eW>' L tattxa' seV k o^en\rte intuitiyeltouentsegn makes thi| dever been simpler

While Jekran CNC machines are designed around the concept of being maintenance free and ultra reliable, occasionally our clients will need support. These could be for both routine maintenance or very rarely machine/component malfunction. We have a department which is specifically charged with looking after such issues and the machines have been designed in a manner which enables very easy maintenance to be conducted. In areas where internet connections are available we can even remotely connect to our devices and diagnose or troubleshoot in real-time. We have a set-up of technicians which in...

Parameters are indicative and are subject to change without notice. 'Excludes vacuum blower and dust silo. Also dependant on spindle selected. 2 Values vary if required supply is 1 230V

Where possible our machines have industry standard fittings and items to ensure that constant supply and availability of parts within the long term remains. Jekran understands that in the industry of CNC machines downtime can be disastrous, thus a comprehensive stock of parts and assemblies are maintained for immediate dispatch once ordered.

Bulebel Industrial Estate