Overview

This document provides detailed technical specifications, operational parameters, and accessory information for a range of mini cranes and manipulators produced by Ormet S.p.A. under the Jekko brand, covering models from 2000 to 2014. It highlights 40 years of company experience in crane manufacturing.

1. Crane Models and Dimensions

• Models include SPB209CP, SPX312CP/C+, SPD360CDH/C+, SPX424CDH/C+, SPX527CDH, SPX1040CDH, and SPX1275CDH, among others.
• Dimensions vary by model, with lengths ranging from approximately 2500 mm to 5900 mm, widths from 770 mm to 1450 mm, and heights from 1600 mm to 2050 mm.
• Weight ranges from 900 kg to 7500 kg depending on the model.

2. Performance Specifications

• Lifting capacities range from 1 ton to 8 tons, with corresponding maximum working radii from 6.5 m to 26.7 m.
• Power units include diesel engines (e.g., Kubota D722-E3B, Isuzu 3CB1, 3CE1) and electric motors with power ratings from 3 kW to 26.9 kW (4.2 Hp to 36 Hp).
• Travel speeds vary between 1.6 km/h and 3.1 km/h depending on the model and configuration.
• Gradeability (ability to climb slopes) is specified, with typical values around 20°.
• Rotation angles for slewing range up to 360°, with boom tilting angles up to 80°.

3. Load and Reach Capacities

• Load charts indicate maximum safe working loads at various boom lengths and angles, with detailed kg-m (kilogram-meter) values provided.
• Jib extensions and accessories allow for increased reach and lifting versatility, with jib lengths from approximately 1.9 m to 17.7 m.
• Hook block capacities and lifting speeds are specified, including main winch performance.

4. Electrical and Control Systems

• Electrical systems operate on 220 VAC single-phase or 400 VAC three-phase power, with auxiliary power packs available.
• Control features include Load Moment Indicator (LMI), Diagnostic Trouble Code (DTC), Crane-Carrier Interlock (CCI), Boom Pressure Indicator (BPI), Stability Control Indicator (SCI), and Virtual Wall (VW) systems.
• Additional functionalities include Two Speed Winch (2SW), Two Way Radio (2WR), Pick & Carry (P&C), and Plug & Play Tools (PPT).

5. Accessories and Attachments

• Various jibs, man baskets, and manipulators (e.g., GVI 4+2 LX, GVI 6+6) are detailed with their dimensions, weights, and load capacities.
• Extendable tracks and counterweights are available to enhance stability and ground pressure distribution.

6. Safety and Operational Recommendations

• All data are indicative and subject to change without prior notice; actual crane performance depends on usage conditions.
• Operators should adhere to specified load limits, boom angles, and stability controls to ensure safe operation.
• Regular diagnostics and monitoring via integrated systems are recommended for maintenance and safety assurance.

7. Multilingual Terminology

The document includes terminology translations in Italian, German, Spanish, and French for key technical terms such as dimensions, slewing, electrical system, lifting capacities, and more, facilitating international use.

8. Manufacturer Information

Produced by ORMET S.p.A., located in Colle Umberto, Italy. Contact details and websites are provided for further information.

Critical Information Highlights

• Maximum lifting capacity up to 8 tons (SPX1275CDH).
• Maximum working radius up to 26.7 meters.
• Power options include diesel engines up to 36 Hp and electric motors up to 26.9 kW.
• Advanced safety and control systems integrated for operational reliability.
• Wide range of accessories for customization and enhanced functionality.