*mydirectindustry

Catalogs
JCB
WHEELED LOADING SHOVEL | 406

WHEELED LOADING SHOVEL | 406

Product catalog summary

Specifications:
The Wheeled Loading Shovel 406 features a maximum engine power of 46kW (62hp) and a maximum operating weight of 5082kg (11204lb). It has a loader capacity of 0.8m3 (1.0yd3). Key dimensions include an overall length of 5133mm (16-10ft), a wheelbase of 2100mm (6-11ft), and a height over the cab of 2500mm (8-2ft). The machine is equipped with a Deutz 4-cylinder diesel engine, model D2011 L04i, with a capacity of 3.62 liters and a gross power rating of 46kW at 2500rpm.

Transmission and Axles:
The transmission is hydrostatic, made by Rexroth, with a low range speed of 6kph (3.8mph) and a high range speed of 20kph (12.4mph). The axles are straight beam type, manufactured by JCB, with an overall axle ratio of 19.3 and a drop box ratio of 2.1.

Hydraulics and Capacities:
The loader hydraulics feature a gear pump with a maximum flow of 60 liters/min and a maximum pressure of 230 bar. The hydraulic cycle times include 4.9 seconds for arms raise, 3.5 seconds for bucket dump, and 3.1 seconds for arms lower. Service fill capacities include a hydraulic and transmission system capacity of 70 liters and a fuel tank capacity of 80 liters.

Electrical System:
The electrical system operates at 12 volts with an alternator output of 80 amp hours and a battery capacity of 105 amp hours.

Standard and Optional Equipment:
Standard equipment includes a single lever joystick control, parallel lift geometry, and a quickhitch with hydraulic pin locking. The cab features a ROPS/FOPS safety structure, adjustable seat, and electronic monitoring with a warning panel. Optional equipment includes limited slip differential axles, epoxy coated cooling pack, air suspension seat, and LiveLink telematics.

Loader and Pallet Fork Dimensions:
The loader dimensions assume the fitment of 12.5x18 tires, with a fork carriage width of 1345mm and a length of tines at 1200mm. The maximum reach at arms horizontal is 1232mm, and the maximum height is 3012mm.

Company Commitment:
JCB emphasizes its commitment to quality, innovation, and customer support, with a global network of over 650 dealers and agents.

Catalog excerpts

WHEELED LOADING SHOVEL | 406 MAX. ENGINE POWER: 46kW (62hp) STATIC DIMENSIONS mm (ft-in) Front axle weight* A Overall length with standard shovel Rear axle weight* Operating weight (includes standard shovel) Wheel base Inside radius Maximum radius over standard shovel Maximum radius over tyres Wheel track Articulation angle Max. width across tyres Note: Dimensions assume fitment of standard JCB 12.5x18 wheel and tyres. *Axle weights based on unloaded bucket in carry position.

Open the catalog to page 1

WHEELED LOADING SHOVEL | 406 ENGINE SERVICE FILL CAPACITIES litres (UK gal) Hydraulic and transmission system Fuel tank Axle oil (front) including hubs Axle oil (rear) including hubs and drop box Naturally aspirated ELECTRICAL SYSTEM Power rating Gross power to SAE J1995/ISO 14396 Torque rating Gross torque System voltage Alternator output Battery capacity STANDARD EQUIPMENT TRANSMISSION Loader: Single lever joystick control; Parallel lift geometry; Quickhitch (hydraulic pin locking). Engine: 4 cylinder oil cooled diesel engine; dual stage cyclonic engine air filter; Single bowl fuel filter;...

Open the catalog to page 2

WHEELED LOADING SHOVEL | 406 LOADER DIMENSIONS PALLET FORK DIMENSIONS PALLET FORK DIMENSIONS Loader dimensions: assumes fitment of 12.5x18 tyres. mm (ft-in) Fork carriage width LOADER DIMENSIONS AF Reach at ground level BF Max. reach arms horizontal CF Below ground level Shovel General Purpose Material density Empty shovel weight Bucket equipment Light Duty Light Duty Capacity heaped General Purpose Static tipping load, straight (EN) Full turn tipping load (500mm load centres) LOADER DIMENSIONS Static tipping load, full turn 40° (ISO) DF Height arms horizontal Bucket width D Minimum ground clearance...

Open the catalog to page 3

WHEELED LOADING SHOVEL | 406 A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the world. By leading...

Open the catalog to page 4

WHEELED LOADING SHOVEL | 406

WHEELED LOADING SHOVEL | 406

Catalog excerpts

All JCB catalogs and technical brochures

Archived catalogs