Catalogs >
JCB >
8018/8020 Conventional Tail Swing Mini Excavator

8018/8020 Conventional Tail Swing Mini Excavator
12Pages

Catalog excerpts

8018/8020 Conventional Tail Swing Mini Excavator - 1

8018/8020 Conventional Tail Swing Mini Excavator Operating Weight: 1822kg / 2067kg

8018/8020 Conventional Tail Swing Mini Excavator - 2

QUALITY, RELIABILITY AND STRENGTH SMALL BUT TOUGH, OUR JCB 8018 AND 8020 CTS MINI EXCAVATORS ARE BUILT TO WORK. LIKE ALL JCBS, THEY BOAST EXCEPTIONAL BUILD QUALITY, SUPERB RELIABILITY AND COLOSSAL STRENGTH. High-strength undercarriage 1 With adjustable wear pads on its track extensions, an 8018/8020 CTS will give you a long service life and a firm, positive, quiet ride during tracking. 1 For ultimate rigidity the extending undercarriage beams are constructed from 25mm solid steel plate. 2 The 8018 and 8020 CTS have high-strength box section dozer blades which can withstand impacts from...

Open the catalog to page 2

8018/8020 Conventional Tail Swing Mini Excavator - 3

QUALITY, REliability, and strength We’ve redesigned the rear structure for improved damage protection on site – there’s a new 3mm thick steel bonnet and an inset rear counterweight grill. optimise durability and service life, we’ve fitted replaceable steel bushes to the kingpost, dipper nose and bucket tipping link. This also provides smooth and accurate operation. 6 An 8018/8020 CTS’ hydraulic hoses (including the auxiliary) are routed through the boom and dipper for ultimate damage protection. 7 Zero risk of inadvertently damaging the boom cylinder during hammering or lorry/skip loading...

Open the catalog to page 3

8018/8020 Conventional Tail Swing Mini Excavator - 4

PERFORMANCE AND PRODUCTIVITY WHILST A JCB 8018/8020 CTS IS EXTREMELY STRONG, IT’S ALSO HIGHLY MANOEUVRABLE, AND BOASTS CLASSLEADING PERFORMANCE: THE PERFECT COMBINATION FOR ANY MINI EXCAVATOR. Higher, further, deeper 1 Our 8018 and 8020 CTS excavators have class-leading lift capacity, courtesy of a large lift ram, centrally-positioned kingpost and a low centre of gravity. 2 An 8018/8020 CTS uses new dig-end geometry, providing extra reach, load-over height, and dig depth for class-leading excavation performance. Versatility 3 You can choose from JCB’s huge range of specially-designed...

Open the catalog to page 4

8018/8020 Conventional Tail Swing Mini Excavator - 5

Built for productivity 5 A solid, stable work platform improves productivity, versatility and operator confidence. 6 Stability is increased further still with an extending undercarriage. In addition to this, retracting the undercarriage improves access to confined areas. 7 A powerful 14.2kW engine produces high torque at low revs, providing ample power for even the most demanding tasks. Our 8018 and 8020 CTS have impressive bucket tearout forces (16.2kN/19.0kN respectively). Combined with fast cycle times, this allows you to do more work in less time. 8 Our new hydraulic block valve allows...

Open the catalog to page 5

8018/8020 Conventional Tail Swing Mini Excavator - 6

EASE OF OPERATION THE JCB 8018/8020 CTS MACHINES ARE DESIGNED TO MINIMISE OPERATOR EXERTION, AND THEREFORE MAXIMISE OPERATOR PRODUCTIVITY. CONTROLLABILITY, COMFORT, VISIBILITY, MAINTENANCE AND SAFETY ARE ALL BUILT IN. In perfect control 1 The 8018 and 8020 CTS have a two-speed tracking button on the dozer lever that’s easy and intuitive to use. 2 The new hydraulic valve block results in smooth, controlled, precise and balanced operation of excavator functions. Comfortably, visibly better 3 We’ve used a one-piece seat base on the 8018/8020 CTS; this reduces machine vibration and provides...

Open the catalog to page 6

8018/8020 Conventional Tail Swing Mini Excavator - 7

Designed for easy maintenance By improving the cab tilt angle by 17%, we’ve increased service access on an 8018/8020 CTS still further (it was already best-in-class). This design eliminates the need to work through restrictive floor hatches during servicing. 8 Wide-opening rear bonnet is supported by a gas strut for easy access to routine checks. We’ve grouped all daily service points to make servicing quick and easy. The push-button bonnet latch and gas strut provide effortless service access. 9 All hoses are colour coded for quick and easy identification in the event of accidental damage....

Open the catalog to page 7

8018/8020 Conventional Tail Swing Mini Excavator - 8

LIVELINK, KNOWLEDGE IS POWER LIVELINK, WORK SMARTER Value added JCB LiveLink is an innovative software system that lets you monitor and manage your machines remotely – online, by email or by mobile phone. JCB’s worldwide customer support is first class. Whatever you need and wherever you are, we’ll be available quickly and efficiently to help make sure your machinery is performing to its full potential. Productivity and cost benefits – Machine location information can improve fleet efficiency and you may even enjoy reduced insurance costs courtesy of the added security that LiveLink brings....

Open the catalog to page 8

8018/8020 Conventional Tail Swing Mini Excavator - 9

STATIC DIMENSIONS UNDERCARRIAGE Machine model E Ground bearing pressure Ground clearance Track width Track tensioning Machine model Optional variable pump Variable pump Standard gear pump Machine model HYDRAULIC SYSTEM Tractive effort (nominal) Travel speed – high Triple section Gear Nominal output 1 Variable (2 Ports) / 1 Gear 1 Variable (2 Ports) / 1 Gear Sprocket idler centres Excavator/track main relief Undercarriage overall length Slew main relief Kingpost clearance Auxiliary hydraulic flow Tailswing radius Hydraulic motors Tailswing over track Overall width of superstructure Machine...

Open the catalog to page 9

8018/8020 Conventional Tail Swing Mini Excavator - 10

EEC NOISE LEVELS (95/27/EC DYNAMIC) WORKING RANGE Machine model MACHINE WEIGHTS Machine model Operating weight* With canopy With FOGS guard With long dipper With Gravemaster dipper STANDARD EQUIPMENT Boom length Dipper length Max digging reach on ground Max digging depth – dozer up Max digging depth – dozer down Max height to dipper nose pivot pin Max vertical wallcut depth Min. front swing radius (no offset) Min. front swing radius (fully offset) Boom swing left Boom swing right Bucket rotation Dipper rotation Dipper tearout Slew speed 8018 CTS ROPS & TOPS certified canopy, full...

Open the catalog to page 10

8018/8020 Conventional Tail Swing Mini Excavator - 11

LIFT CAPACITIES – Standard dozer, 230mm rubber tracks, 1161mm dipper, no bucket. 8018 CTS Reach from slew centre Load Point Capacity at maximum reach Dozer down Dozer down Dozer down Dozer down Dozer down Ground Level LIFT CAPACITIES – Standard Dozer, 230mm Rubber Tracks, 1261mm dipper, No bucket. 8018 CTS Reach from slew centre Load Point Capacity at maximum reach Dozer down Dozer down Dozer down Dozer down Dozer down Ground Level LIFT CAPACITIES – Standard Dozer, 250mm Rubber Tracks, 1261mm dipper, No bucket. 8020 CTS Reach from slew centre Load Point Capacity at maximum reach Dozer down...

Open the catalog to page 11