Catalogs >
JCB >
8014/8016 Conventional Tail Swing Mini Excavator

8014/8016 Conventional Tail Swing Mini Excavator
1 / 12Pages

Catalog excerpts

8014/8016 Conventional Tail Swing Mini Excavator - 1

8014/8016 Conventional Tail Swing Mini Excavator Operating Weight: 1634kg/1657kg

8014/8016 Conventional Tail Swing Mini Excavator - 2

QUALITY, RELIABILITY AND STRENGTH SMALL BUT TOUGH, OUR JCB 8014 AND 8016 CTS MINI EXCAVATORS ARE BUILT TO WORK. LIKE ALL JCBS, THEY BOAST EXCEPTIONAL BUILD QUALITY, SUPERB RELIABILITY AND COLOSSAL STRENGTH. High-strength undercarriage A robust fixed-width undercarriage with heat-treated track rollers means an 8014/8016 CTS will give you a long service life and a firm, positive, quiet ride during tracking. 2 The 8014 and 8016 CTS have high-strength box section dozer blades which can withstand impacts from kerbs and manhole covers. Dozer blade hoses are protected by a steel plate. 3 The high...

Open the catalog to page 2

8014/8016 Conventional Tail Swing Mini Excavator - 3

QUALITY, REliability, and strength We’ve redesigned the rear structure for improved damage protection on site – there’s a new 3mm thick steel bonnet and an inset rear counterweight grill. optimise durability and service life, we’ve fitted replaceable steel bushes to the kingpost, dipper nose and bucket tipping link. This also provides smooth and accurate operation. 6 An 8014/8016 CTS’ hydraulic hoses (including the auxiliary, where specified) are routed through the boom and dipper for ultimate damage protection. 7 Zero risk of inadvertently damaging the boom cylinder during hammering or...

Open the catalog to page 3

8014/8016 Conventional Tail Swing Mini Excavator - 4

PERFORMANCE AND PRODUCTIVITY WHILST A JCB 8014/8016 CTS IS EXTREMELY STRONG, IT’S ALSO HIGHLY MANOEUVRABLE, AND BOASTS CLASS-LEADING PERFORMANCE: THE PERFECT COMBINATION FOR ANY MINI EXCAVATOR. Higher, further, deeper 1 Our 8014 and 8016 CTS excavators have class-leading lift capacity, courtesy of a large lift ram, centrally-positioned kingpost and a low centre of gravity. 8014/8016 CTS uses new dig-end geometry, providing extra reach, load-over height, and dig depth for class-leading excavation performance. Versatility 3 You can choose from JCB’s huge range of specially-designed 8014/8016...

Open the catalog to page 4

8014/8016 Conventional Tail Swing Mini Excavator - 5

Built for productivity 5 A solid, stable work platform improves productivity, versatility and operator confidence. 6 Optimally designed, the large footprint area of the tracks offer exception stability without compromising access to confined areas. 7 The 8014 and 8016 CTS machines have excellent load hold capability, which means their excavator arms can be accurately controlled, especially during precise lift and placing tasks. 8 We’ve designed the dozer blade profile for supremely efficient material roll. This means grading performance is improved during dozing. 9 A powerful 14.2kW engine...

Open the catalog to page 5

8014/8016 Conventional Tail Swing Mini Excavator - 6

EASE OF OPERATION THE JCB 8014/8016 CTS MACHINES ARE DESIGNED TO MINIMISE OPERATOR EXERTION, AND THEREFORE MAXIMISE OPERATOR PRODUCTIVITY. CONTROLLABILITY, COMFORT, VISIBILITY, MAINTENANCE AND SAFETY ARE ALL BUILT IN. In perfect control Comfortably, visibly better 1 The 8016 CTS has an optional two-speed tracking button on the dozer lever that’s easy and intuitive to use. 3 We’ve used a one-piece seat base on the 8014/8016 CTS; this reduces machine vibration and provides high levels of operator comfort. 2 The new hydraulic valve block results in smooth, controlled, precise and balanced...

Open the catalog to page 6

8014/8016 Conventional Tail Swing Mini Excavator - 7

Designed for easy maintenance By improving the cab tilt angle by 17%, we’ve increased service access on an 8014/8016 CTS still further (it was already best-in-class). This design eliminates the need to work through restrictive floor hatches during servicing. 7 Wide-opening rear bonnet is supported by a gas strut for easy access to routine checks. We’ve grouped all daily service points to make servicing quick and easy. The push-button bonnet latch and gas strut provide effortless service access. 8 All hoses are colour coded for quick and easy identification in the event of accidental damage....

Open the catalog to page 7

8014/8016 Conventional Tail Swing Mini Excavator - 8

LIVELINK, KNOWLEDGE IS POWER LIVELINK, THINK SMARTER Value added JCB LiveLink is an innovative software system that lets you monitor and manage your machines remotely – online, by email or by mobile phone. JCB’s worldwide customer support is first class. Whatever you need and wherever you are, we’ll be available quickly and efficiently to help make sure your machinery is performing to its full potential. Productivity and cost benefits – Machine location information can improve fleet efficiency and you may even enjoy reduced insurance costs courtesy of the added security that LiveLink...

Open the catalog to page 8

8014/8016 Conventional Tail Swing Mini Excavator - 9

STATIC DIMENSIONS UNDERCARRIAGE Machine model E Track width Ground bearing pressure Ground clearance Track tensioning Travel speed – high Tractive effort (nominal) Machine model Undercarriage overall length Kingpost clearance Tailswing radius Tailswing over tracks Overall width of superstructure Ground clearance Track gauge Transport length – Standard dipper Transport length – Long dipper Transport height with FOGS guard Transport height without FOGS guard Track height Slew main relief Auxiliary hydraulic flow Hydraulic motors Cab/canopy width Distance from seat base to roof Door aperture...

Open the catalog to page 9

8014/8016 Conventional Tail Swing Mini Excavator - 10

A Max digging reach rnrn 4021 B Max digging reach on ground rnrn 3974 C Max digging depth - dozer up rnrn 2271 Max digging depth - dozer down rnrn 2648 2595 D Max digging height rnrn 3453 E Max dump height rnrn 2531 F Max height to dipper nose pivot pin rnrn 2953 G Max vertical wallcut depth rnrn I 961 H Min. front swing radius (no offset) rnrn I 570 Min. front swing radius (fully offset) rnrn I 356 I Boorn swing left degrees 55 J Boorn swing right degrees 75 Bucket rotation degrees 198 Dipper rotation degrees 121 Slew speed rprn 8.45 EEC NOISE LEVELS (95/27/EC DYNAMIC) Machine model...

Open the catalog to page 10

8014/8016 Conventional Tail Swing Mini Excavator - 11

LIFT CAPACITIES - Standard dozer, 230mm rubber tracks, 1161mm dipper, no bucket. Load Point Ground Level Dozer down Dozer down Reach from slew centre Dozer down Dozer down Capacity at maximum reach Dozer down LIFT CAPACITIES - Standard dozer, 230mm rubber tracks, 1161mm dipper, no bucket. Reach from slew centre Load Point 1.5m 2.0m 2.5m 3.0m Capacity at maximum reach Max distance Height 360 Dozer down Dozer up 360 Dozer down Dozer up 360 Dozer down Dozer up 360 Dozer down Dozer up 360 Dozer down Dozer up Distance Lift capacity front. Notes: I. Lifting capacities are based on ISO 10567, that...

Open the catalog to page 11