1. Catalogs
  2. JC CHERRY INC.
  3. T4P-HH-KL-220-FL

T4P-HH-KL-220-FL

T4P-HH-KL-220-FL

T4P-HH-KL-220-FL

Product catalog summary
Acceptable Device: The document specifies the use of TO-247 4L and similar devices. The pin configuration includes Drain, Source (Power), Source (Signal), and Gate.
Dimensions: Various dimensions are provided for components and board thickness, including measurements in both millimeters and inches. The recommended thickness for fixing the socket to a board is between 1.6 to 4.0 mm.
Connection Method: The document outlines the procedure for inserting a device into a test socket, tightening set screws with a hex wrench, and removing the device post-testing. It emphasizes the use of M4 screws, washers, and crimp terminals for secure connections.
Temperature Rise Chart: A reference chart is included to show the temperature rise in relation to current (Amps), indicating the performance of the device under different electrical loads.
Usage Instructions: Detailed steps are provided for using the test socket, including the insertion of the device and securing it with set screws. The document also highlights the importance of turning off power before removing the device.
Additional Notes: The document mentions the use of a Kelvin contact and specifies the cable type as AWG#6 (14mm²).
See more

Catalog excerpts

T4P-HH-KL-220-FL-1

www.connect.co.jp www.jccherry.com T-Rise Current Chart(Reference) When using one contact as a Kelvin contact. Cable used:AWG#6(14mm 2 ) ** PC Board etc. ** When fixing the socket to a Board etc. Please use a thickness of 1.6 to 4.0 mm.

 Open the catalog to page 1
T4P-HH-KL-220-FL-2

www.connect.co.jp www.jccherry.com * M4 Screw M4 Spring washer M4 Washer Crimp terminal A connection example is shown below. Cable *It is parts are adjunct to the Test Socket. The test socket can be fixed to a board, etc. Insert the device from the insertion slot at the top of Test socket. Tighten the four set screws with a hex wrench. The measurement preparation is done. After completing the test, turn off the power and loosen the set screw. Remove

 Open the catalog to page 2

All JC CHERRY INC. catalogs and technical brochures

  1. DSMP-CR24

    1  Page

  2. D2RF-PLUG-L

    3  Pages

  3. SHVR15-T16P

    1  Page

  4. SHVR-T16P

    1  Page

  5. FSE1A-5P

    1  Page

  6. UJMSF Series

    1  Page

  7. UJMSW Series

    1  Page

  8. UJMST Series

    1  Page

  9. LD254-xP-

    1  Page

  10. ULK60S-ML65M6

    2  Pages

  11. HVL-x-2P-30

    2  Pages

  12. SCH-8P-xxxx

    1  Page

  13. MDSxxx-xxx-xx

    7  Pages

  14. MDSxxR-ST-x

    1  Page

  15. MDSxxP-ST-x

    1  Page

  16. MDSxxP-SC-x

    1  Page

  17. MDSxxR-SC-x

    1  Page

  18. RPSMAJ103-T

    1  Page

  19. Slit Pin

    3  Pages

  20. LD254P-xP-F8

    1  Page

  21. LD200-4P-xx

    1  Page

  22. LD200P-xP-F8

    1  Page

  23. LD143-xP-H85

    1  Page

  24. TT3P-L214

    1  Page

  25. UJRK60-2x

    1  Page

  26. HAYC-x-2P-15

    1  Page

  27. MPGAP Series

    2  Pages

  28. GU10 Series

    3  Pages

  29. PDSP series

    1  Page

  30. PDSP-

    1  Page

  31. PDSP

    1  Page

  32. T4P-L214-ST-

    1  Page

  33. LD143-4P-H85

    1  Page

  34. LD254-3P-

    1  Page

  35. LD200P-3P-F8

    1  Page

  36. PDHS254-

    2  Pages

  37. PDSA-

    2  Pages

  38. T

    4  Pages

  39. GD18 series

    4  Pages

  40. GU16 series

    2  Pages

Archived catalogs

  1. NSP126

    1  Page

  2. T3P

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.