*mydirectindustry

Catalogs
JC CHERRY INC.
Plastic-Shell Micro-D Sub Connector with Cable

Plastic-Shell Micro-D Sub Connector with Cable

Product catalog summary

Overview: This document provides technical specifications and ordering information for Micro-D connectors with insulated wire, specifically focusing on plastic shell types and solder cup types. It includes details on wire specifications, panel mounting methods, and mounting hardware.

Specifications:

Connector Type: Micro-D connector with insulated wire, available in plastic shell and solder cup types.
Wire Pitch: 1.27mm/0.050".
Wire Size: Options include AWG26 and AWG24.
Wire Insulation: ETFE and PTFE options available, with specific military specifications for PTFE.
Wire Length: Standard lengths include 500mm and 1000mm, with custom lengths available upon request.

Ordering Information:

Part Number Format: MDJ□□P-W-□□L□□□□-T-□, where variables denote specific configurations such as pin count and wire color.
Wire Color Options: 10-color or white.
Number of Pins: Options range from 9 to 51 pins, with corresponding dimensions provided.

Mounting and Hardware:

Panel Mounting: Two methods are available: front panel and rear panel mounting, with specific dimensions for each pin count.
Mounting Hardware: Includes hex jack posts and jack screws, with various types and specifications detailed.

Additional Notes:

Custom orders are available for specific wire types and lengths.
Detailed contact arrangements and panel machining dimensions are provided for accurate installation.

Catalog excerpts

Plastic-Shell Micro-D Sub Connector with Cable-1

Compact Lightweight 1.27mm/0.050" pitch Micro-D connector with Insulated Wire, Plastic typeWith Pre-attached Wiring Plastic Shell type How to Order -Wire Color -Wire Length *3 w : White Number Plug Wire Size of Pins 26: AWG26 W :ETFE Insulated wire(UL1513(105°C)) W04 :PTFE Insulated wire(MIL-W-16878/04)*2 W11 :PTFE Insulated wire(MIL-W-22759/11) W33 :Cross-linked modified *1 Please refer to the table on page 29A5 for wire specifications. *3 Other lengths can also be specified. Please contact us for more information. *4 Please refer to Page 29A8, 29A9 for "Mount Hardware"

Open the catalog to page 1

Plastic-Shell Micro-D Sub Connector with Cable-2

Micro-D ConnectorSolder Cup type, with Insulated wire type (Receptacle pin layout position numbers are reversed Left to Right.) Plug (Plug Pin Connectors ,Solder Cup, with wire type) Contact Arrangements (Face View)

Open the catalog to page 2

Plastic-Shell Micro-D Sub Connector with Cable-3

Micro-D connector There are two methods for panel mounting as shown in the figure, and the panel machining dimensions are different. Rear Panel mount Rear Panel mount 9—5pin Front Panel mount 9 — 51pin

Open the catalog to page 3

Plastic-Shell Micro-D Sub Connector with Cable-4

www.connect.co.jp www.jccherry.com Micro-D connector Receptacle (Plug) Plug (Receptacle) Type:Jack Screw Code Type:Hex Jack Post, Front Panel Code P P15 Type:Jack Post, Rear Panel Code RP16 RP24 RP40 Type:Jack Post Code P P15（Multiple washers are required.） RP16 RP24 RP40 Mount Hardware

Open the catalog to page 4

Plastic-Shell Micro-D Sub Connector with Cable-5

www.connect.co.jp www.jccherry.com Micro-D connector Mount Hardware Jack post,Rear panel mount Jack post,Rear panel mount Jack post,Rear panel mount For the panel mounting method, please refer to page 29A10. Base on the screws for 100 positions is #4-40 UNC, please contact us.

Open the catalog to page 5

Plastic-Shell Micro-D Sub Connector with Cable-6

www.connect.co.jp www.jccherry.com マイクロ Dsubコネクタ Micro-D connector Mount Hardware Long Jack Screw Jack Screw Jack Screw MD-HW-FF Made to order Base on the screws for 100 positions is #4-40 UNC, please contact us.

Open the catalog to page 6

All JC CHERRY INC. catalogs and technical brochures

Archived catalogs

NSP126
1 Page
T3P
1 Page