T.A.S.T.E. Evaporator
1 / 8Pages

T.A.S.T.E. Evaporator The evaporator to use for heat sensitive products

Manufacturing and assembly The evaporator is fully assembled and tested in our factory in a horizontal position and is lifted into vertical position at customer’s site. Installation time is short with only utility connections necessary if foundations have been prepared in advance. 304 or 316 stainless steel is used depending on the different product requirements. Skilled workers, specializing in stainless steel manufacturing, make it possible to achieve a very precise assembly.

For citrus juice concentrate and other clear fruit juices The JBT T.A.S.T.E. evaporator (Thermally Accelerated Short Time Evaporator) provides pasteurization and stabilization of juice during the pre-heating cycle and after the first evaporation stage. Juice is introduced as a turbulent fog in the tube nest.. As a fog, the juice reaches an acceleration speed of ~700 km per hour (435 mph) in the tubes. The JBT T.A.S.T.E. evaporator eliminates recycling of the juice during concentration, thereby minimizing the length of time at which heat is applied to the juice and resulting in better...

Essence recovery system Advantages • best quality output • low operating cost • low capital investment • mechanical reliability • small footprint • automatic operation and control • essence recovery mounted on the machine (optional) Cleaning in place CIP is incorporated into the evaporator in order to provide high sanitation and cleaning in 30-45 minutes. Quick cleaning in place system Water CIP is engaged without changing the normal working conditions of the evaporator, simply turn the valve from the juice feed tank to the cleaning solution hold tank. Cleaning frequency depends on type of...

Special applications In order to meet specific customer requirements, a special finishing stage can be added to a normal T.A.S.T.E.. This Multi Purpose T.A.S.T.E. Evaporator (MPTE) is particularly suited for tomato paste producers. Compared with the traditional tomato paste evaporators, the MPTE has these advantages: • evaporation rate up to 1:3.3 • total residence time: 45 minutes • high tomato paste concentration, both • in hot and cold break • easy change-over from fruit juice to • tomato processing • reduced cleaning frequency Apple clear concentrate For apple juice, a special “hot...

Finishing stage with forced circulation for tomato paste 1. Water from cooling tower 1 2. Vapor 3. Product 4. Live Steam 5. Tomato juice 9 to 13 Brix 6. Tomato paste out 28 to 38 Brix 7. Tomato process: four thermal effects, evaporation rate 1:3.3 8. Product flow sheet 9. Energy flow sheet Multipurpose T.A.S.T.E. Evaporator Multipurpose T.A.S.T.E. Evaporator Multipurpose T.A.S.T.E. Evaporator

Overall height Overall width Overall length * The dimensions quoted refer to the machine as shown and may vary according to the processing capacity. Model 3314 (4 Effects) Model 3315 (5 Effects) Model 3316 (6 Effects)

COUNT ON JBT TO HELP PROTECT YOUR INVESTMENT JBT’s greatest value in PRoCARE® services comes from preventing unexpected costs through smart, purposeful, and timely maintenance based on unmatched knowledge and expertise. PRoCARE service packages are offered as a maintenance agreement in various service levels, depending on your production and cost management requirements. J B T D I V E R S I F I E D F O O D & H E A LT H FRESH PRODUCE TECHNOLOGIES | FRESH-CUT, ROBOTICS, STEAMING | FRUIT AND VEGETABLE PROCESSING | SECONDARY PROCESSING | ASEPTIC SYSTEMS | FILLING AND CLOSING | IN-CONTAINER...