Catalogs >
JBT Corporation >
Vibrating System

Vibrating System
13Pages

Catalog excerpts

FUNCTIONS JBT URTASUN Cleaning Purpose A product is often dirty when it arrives and the dirt needs to be removed at the start of the production line. Vibrating cleaning machines are one such machine for this purpose. They can be used to separate the pods from green beans, clean spinach, remove plant matter that comes with the product, remove shavings or blocks after the freezing tunnel, separate pea pods, etc. The upper sheets can be exchanged depending on the product for processing. Side, front or lower product or rejection outlets available. Double-floored tray to separate good products from rejections. Perforated upper tray to separate good product from rejections. Different grille designs available depending on the preferred outcome. Different vibration technologies a

Open the catalog to page 1

JBT URTASUN Grading and Sorting Purpose Grading or sorting is one of the most characteristic applications of vibrating machines. Vibrating machines can grade a wide variety of products, such as peas, broccoli, strawberries, etc. They can be used with up to 5 different calibers. Another possibility is a vibrating machine with a metal detector. Up to 5 different calibers in the same vibrating machine. Can be designed in large dimensions. Great performance with a lower footprint. Can grade peas and broccoli in the same vibrating machine (involves exchanging grilles as appropriate). Different...

Open the catalog to page 2

JBT URTASUN Feeding and Distribution Purpose They spread the product out, open it and feed it continuously into the next machine. This enables a uniform and even product flow. Using this type of vibrating machine is very important when feeding blanching machines, different types of optical sorting machines, cutting machines, peeling machines, etc. They can feed in line or perpendicularly, with diagonal unloading onto the next machine. They can be designed in a “Z” shape to adapt to the machine being fed. Can come with a draining area if required. Resonance technology using carbon fiber leaf...

Open the catalog to page 3

JBT URTASUN Dewatering Purpose Their purpose is to remove as much water as possible from the product. There are several ways to do this, depending on the product's location. It can be performed using grilles, balls that hit a mesh while pushing the product, or pushed by fans. The latter are usually used at the entrance to the freezing tunnel, as the fans can suck out a lot of the water from the product and leave it in the best possible condition for freezing. They remove water from the product on exit from washing machines or on entry to the freezing tunnel. Different designs and grilles...

Open the catalog to page 4

JBT URTASUN Aligning Purpose Can align the product before the optical sorter or the cutter when required. For example, with green beans or carrots. Can remove small pieces from the gaps between grilles. Interchangeable grilles. V-shaped channels with adjustable heights depending on the product. Gap between channels to eliminate small

Open the catalog to page 5

JBT URTASUN Transport Purpose Takes product from one point to another on the line in the most hygienic way possible. Also enables product distribution to successive machines. Transportation over long lengths. Transportation by chain-linked vibrators. Distribution to different machines, such as corn dehuskers or green bean c

Open the catalog to page 6

JBT URTASUN cup up / cup down Purpose Natural frequency vibrator used to turn fruit previously cut in half. A product sometimes needs to be placed upwards or downwards before sending it to the optical sorter. That's where this vibrator comes in. Strategically designed to turn the rotate cut fruit. Easy maintenance. Interchangeable grille.

Open the catalog to page 7

JBT URTASUN Glazing Purpose The glazing vibrator transports the product while covering it with a film of water. This may be needed to protect the product after the tunnel or before a second run through the freezing tunnel, to wash it before another process, or to apply a layer of water in the packaging line. This vibrator can also drain the product and remove excess water before recirculating it. It also enables small particle and shaving removal. Can be used with any type of product. Includes a filtering grille. Water recovery system. Can use natural frequency or brute force. Adaptable in...

Open the catalog to page 8

TECHNOLOGIES JBT URTASUN Brute Force (Direct Drive) Purpose These are the simplest and cheapest vibrating machines. Movement is transferred directly from the motovibrators on the tray, and the tray is insulated from the chassis using nozzles, springs or air mounts. Simple design and maintenance. Widths ranging from 3-8 millimeters. Acceleration ranging from 3-4 g. Longer transitions between starts and stops compared to with other vibrators. Recommended for grain products. A variator can be fitted to slightly change the vibratio

Open the catalog to page 9

JBT URTASUN Resonant (Natural Frequency) Purpose The most used vibrators due to their versatility and simplicity. There are all different types, convergent, divergent, draining, glazing, distribution, for leaves, for grains, etc. Simple design and maintenance. Extensive range of widths (9-22 millimeters), enabling the processing of all types of products and greater capacities. Acceleration ranging from 3-7 g. There are no limits to applications or products requiring processing. Natural frequency vibrating tray on carbon fiber leaf springs attached to the chassis and the vibrator tray....

Open the catalog to page 10

JBT URTASUN Resonant Electromagnetic Purpose It is a combination of resonant vibrators (movement transferred from the chassis to the tray by carbon fiber leaf springs) and electromagnetic vibrators (driven by an electromagnetic motor). Used for delicate products, dosing, flow control, feeding fillers, mixers, etc. For precision jobs in general. Quickly adjustable width (up to 9 mm) using a potentiometer, included with the vibrator panel. Easy maintenance. Maximum width 6 millimeters. High acceleration Comes with an accelerometer. Enables instant starts and stops, thereby eliminating...

Open the catalog to page 11

JBT URTASUN Electromagnetic Purpose The electromagnetic vibrator is generally used to feed multiheads. The electromagnetic motor enables instant, very precise starts and stops. Stands out for its precision during stops and starts. Widths ranging from 1-3 millimeters. Acceleration ranging from 4-7 g. Limited in terms of dimensions. The same as the resonant electromagnetics, but with less working width, and therefore, for lower production ca

Open the catalog to page 12

Vibrating System 13Pages

Catalog excerpts

All JBT Corporation catalogs and technical brochures

Vibrating System
13Pages