Standard features More than 50 years of seaming expertise allow JBT FoodTech to offer a broad range of reliable state-of-the-art seamers, perfectly suited for the tuna canning application. Grouped lubrication points Large access panels Sanitary design Stepless fill volume adjustment Large diameter infeed turret Power-driven lifting tables and seaming spindles avoid can and cover slip, yielding optimum and consistent seam quality. Non-interlocking seamer spindles further contribute to seam quality and offer easy seam setting. Safety guards Stepless height adjustment JBT seamers and tuna oilers/briners are designed for perfect synchronization, yielding minimum can acceleration and shocks during transfer. Liquid spillage in the seamer is minimized by means of the machine‘s unique low lift-cam, perfect can acceleration and the ideal selection of infeed chain to seam spacing. Suitable for food contact according to EC regulations The raised tinline execution suits low container heights down to 26 mm (1”); seamers can be executed for handling small diameter cans, down to 45 mm (1 1/2”). Independent drive Automatic lubrication Automatic fill volume adjustment Quick change parts Synchronisation with closer Sanitary base Line control JBT FoodTech offers you the convenience and cost savings of ordering spare parts via the internet (in US only). Part of the technology presented in this brochure is patented. JBT FoodTech, whose policy is to continuously improve its products, reserves the right to discontinue or change specifications, models or design without notice and without incurring obligation. North America Europe John Bean Technologies N.V. Breedstraat 3 9100 Sint-Niklaas Belgium Tel.: +32-3/780-1211 Fax: +32-3/777-7955 [email protected] John Bean Technologies S.p.A. Via Mantova 63A 43122 Parma Italy Tel.: +39/0521-908411 Fax: +39/0521-460897 [email protected] Optimum Fill Performance Latin America Asia Pacific John Bean Technologies Corporation 2300 Industrial Avenue Madera CA 93639 USA Tel.: +1-559/661.3200 Fax: +1-559/661.3156 [email protected] John Bean Technologies Ind. e Com. Ltda. Av. Eng. Luiz Carlos Berrini 1461, 9° andar 04571-903 Sao Paulo/SP Brazil Tel.: +55-11/3055-1010 Fax: +55-11/5506-8822 [email protected] John Bean Technologies Thailand Ltd. 16/F 253 Asoke Building 253 Sukhumvit 21 (Asoke) Road Kwang Klongtoey, Khet Wattana, Bangkok 10110, Thailand Tel.: +66/2 2614271 - 2 Fax: +66/2 2614099 © Copyright by John Bean Technologies N.V. - TF 010608-UK, Printed in Belgium. Heavy duty construction XL-series Pre-Vacuumizing Tuna Oiler/Briner

Accurate headspace control The two-phase fill cycle, with high vacuum pre-vacuumizing and extra long run-off phase, is specially designed for the tuna application. A vacuum system control module with standard no vacuum - no fill feature is integrated in the filler control system. Tuna-specific, two-phase fill cycle Air is effectively and consistently removed from the container during the high-vacuum, pre-vacuumizing phase. The use of two fill phases instead of one controls the liquid velocity into the container, avoiding damage to the tuna tablet. This is especially important during the first...