JBT URTASUN Redler Elevator (Z Elevator) Purpose This transportation equipment collects and unloads products at different heights. They are connecting elements with a lower or loading section, an inclined section, and an upper or unloading section. It drags and lifts the product using polyethylene blades that slide on a fixed bed of electropolished stainless steel. Designed and manufactured to the required dimensions for the line. No product left on the floor is its biggest benefit. There is a standard model, a hygienic model, and a model for delicate products. Simple chain and sprocket drive system. Allows for the installation of a number of extras to improve its features. Suitable for all types of products. Self-cleaning system can be installed. Easy maintenance and a long service life. Can be manufactured with diagonal unloading and intermediate dividers to distribute the product into different outputs. Fully constructed in stainless steel AISI 304 and in polyethylene. Reinforced chain. Self-tensioning system on a drive shaft.

JBT URTASUN Thermoplastic / PVC Lifting Conveyor Purpose The PVC lifting conveyor has the same structure as the thermoplastic modular belt (polyethylene), only the belt type changes. It is used to lift the product from one point to another using a belt with blades. It generally consists of only one inclined section, but can also include a horizontal lower section. The PVC belt's characteristics mean they are always used at the start of the line, when the product is dirty. Thermoplastics are fitted for use with clean products. The PVC lifting conveyor provides a satisfactory outcome with a dirty...

JBT URTASUN screw Purpose The purpose of the worm screw is to transport the product. It is completely sealed so no product is lost during transportation. Can lift, lower, or transport product horizontally. Can mix product, using a special propeller in that case. Easy maintenance and a long service life. Can handle a maximum slope of 35 degrees. Designed and manufactured to the required dimensions for the line. Can be made with a polyethylene or stainless

JBT URTASUN Roller Purpose The roller conveyor is used to transport containers full of product. They are appropriately sized for the types of container requiring transportation. It can also act as a weighing system. Can be driven by rollers or chains. Easy maintenance. Can also be used to weigh product that falls into the container. Can be made into a shuttle so the roller conveyor moves along rails. Designed and manufactured to the required dimensions for

JBT URTASUN belts Purpose Conveyor belts are the most commonly used transportation elements. Their purpose is to connect one point of a line with another. There are several types: standard, hygienic, folding side, weighing, twoway, etc. Can use PVC, modular thermoplastic (polyethylene) or thermodrive (polyurethane) belts. Can support a small slope depending on the type of product being transported. The belt can come with push rods. Easy maintenance. Can come with load cells for product weighing. Valid for any type of product. Designed and manufactured to the required dimensions for the line....

JBT URTASUN Pumping system Purpose Pumping systems consist of a reception tank where the product is received with an output into the pump, a drive pump, a solenoid valve to control the level of the tank, connection pipes, a decelerating siphon, a draining vibrator and a water return tank with a pump. It is a more modern and cleaner product transportation system. The pipes are installed at height to leave a cleaner and more open area. When transporting a product with water, it also cleans. Installations are fitted at height, so the line is left unobstructed. Product can be collected at several...