FTNON Freshline Centrifuge Removes surface water from fresh-cut produce gently and consistently, enhancing quality

JBT FTNON Freshline Centrifuge High-volume flexibility allows use in batch processing or continuous flow mode: as a stand-alone solid performer or as the central point of line control. Technology and dependable performance make this dryer the ideal choice for your fresh-cut line. Drying The dryer consists of 1,2 or 4 drums, drive motor(s), infeed conveyor(s), heavy duty support frame and a control panel. The spinning drum(s) is/are loaded using the spiral layering system to ensure an evenly distributed load on the inside of each drum. The centrifugal forces will press the product against the...

JBT FTNON Freshline Centrifuge Options 1) Two belt accumulation system Bottom buffer conveyor The accumulation system consists of two belts, one above the other with the bottom conveyor acting as the buffer conveyer. The buffer conveyer is constructed as a cow-horn belt to eliminate the use of side guides which can be difficult to clean in this incline application to a centrifuge system. Top conveyor This conveyor is constructed as a cow-horn conveyor, to eliminate side guides and simplify the construction. The conveyor comes with a dripping pan underneath to shield the product on the buffer...

Belt Belt cleaning Belt drive Controls PVC blue Scraper Drum motor Included in dryer panel Technical specifications - Discharge conveyor FLC 001 - 1 drum FLC 002 - 2 drums FLC 004 - 4 drums INFEED HEIGHT, APPROX. 1,450 mm / 57" 1,450 mm / 57" 1,500 mm / 59" DISCHARGE HEIGHT, APPROX. 850 mm / 33.5" 850 mm / 33.5" 900 mm / 35" 6) Platform next to supply shaker Next to the supply shaker a small platform can be mounted for improved access. The platform is complete with stairs. • Dimensions platform 800 mm / 31,5" x 1,500 mm / 59" • Top plates, stainless steel 304 checker plate JBT FTNON can change...