SCREW PUMPS Industrial Applications Quality Products for Mechanical & Fluid Power

The comprehensive service for the mechanical power transmission & fluid power industries. Screw Pump Applications This catalogue has an industrial bias. There is also a marine sector screw pump catalogue available with oil & gas to follow in the near future. Many of these screw pump models serve industrial, oil & gas and marine applications. These screw pumps provide the ideal solution for many industrial applications, ranging from iron and steel to the paper industry, mining to wind-energy generators, as well as machine tools (high lubro-refrigerant pressure) and oil-hydraulic or hydro-electric systems....

Screw Pumps SCREW PUMPS PCX Series ATEX Zone 1 POF-PWOF Series PQJ Series

Screw Pumps SCREW PUMPS For hydraulic oils, lubricating oils Maximum delivery pressure (continuous) = 50 bar at 2900 rpm (30 bar for model PA…0T) Flow rate up to 850 L/min Motor connection ISO 3019/2 PA-type 3-screw pumps For hydraulic oils, lubricating oils. Maximum delivery pressure: Motor connection: Typical application: 50 bar at 2,900 rpm. ISO 3019/2 Designed to be mounted vertically in tanks for use in filtration and cooling systems or for low pressure auxiliary circuits. Versions available with filter in the suction circuit (model PA...0M) and with axial suction flange (model PA…0T). Technical...

Screw Pumps SCREW PUMPS Dimensions in mm unless otherwise stated.

Screw Pumps PA Series Ordering Code SCREW PUMPS Ordering Code PA 055 # 4 A O M A10 R 000 Options Rotation ( R = CW clockwise, standard) Screws material (A10 = cast iron idler screws - standard) Inlet type (T = axial inlet flange, BSP threaded, M = with strainer) Motor connection flange (O = ISO motor connection flange - standard execution; other digits apply) Screw lead length Number of leads Pump main screw diameter Series identification Pump Motor Assembly Dimensions Note! Dimensions are for guidance only

Screw Pumps PA Series Pump Motor Assembly Dimensions SCREW PUMPS Note: M dimension only

Screw Pumps PCX Series – ATEX Zone 1 Specifications SCREW PUMPS For hydraulic oils, lubricating oils Maximum delivery pressure (continuous) = 30 bar at 2900 rpm and at 1450 rpm Flow rate up to 5,400 L/min Optional integrated safety valve. Installation Data Installation area: Industrial, marine. Ambient temp. Min./max: -10°C (storage only) / 0 to 60°C (operating) for different values contact jbj Techniques Limited. Operating Data Fluid specification: Suggested inlet strainer filtration: Fluid viscosity range: Speed range: Rotation (viewed from coupling end): Hydraulic and lubrication oils. 400 μ...

Screw Pumps PCX Series DimensionsSEIM SCREW PUMPS Inlet flange can be position @ 90 and 180 from position shown. Dimensions in mm unless otherwise stated. Please contact "jbj Techniques" for dimensional drawings Further details for PCX series screw pump www.jbj.co.uk/e-publications/API-676_compliant-screw-pumps_from-jbj-Techniques-Limited/index.html

Screw Pumps PDA Series SpecificationsSEIM SCREW PUMPS For hydraulic oils, lubricating oils Flow rate up to 160 L/min Maximum delivery pressure (continuous) 10 bar Standard valve calibration 6 bar (other on request) A version is available with an integrated bell housing to enable direct coupling to electric motors having a D80 or D90 frame size. Flow rate up to 850 L/min Electric motor connection ISO 3019/2 For hydraulic oils, lubricating oils. Installation Data Installation: Environment: Amb. Temperature Min/Max: Typical applications: Indoor or Outdoor Industrial -25°C (CS) and -40°C (LTCS) ,...

Screw Pumps PDA Series DimensionsSEIM SCREW PUMPS

Screw Pumps PDA Series DimensionsSEIM SCREW PUMPS Dimensions in mm unless otherwise stated.

Screw Pumps PDA Series Motor Pump DimensionsSEIM SCREW PUMPS Dimensions in mm unless otherwise stated. * Bellhousing included

Screw Pumps PDA Series 50 Hz Performance Chart SCREW PUMPS

PDA Series 50 Hz Performance Chart SEIM SCREW PUMPS Pump size PDA040#2B Pump size PDA040#2C cSt rpm bar 0 1 2 3 4 5 6 7 8 9 10

Screw Pumps PDA Series 60 Hz Performance Chart SCREW PUMPS

PDA Series 60 Hz Performance Chart SEIM SCREW PUMPS

Screw Pumps PDK Series SpecificationsSEIM SCREW PUMPS For hydraulic oils, lubricating oils Flow rate up to 460 L/min Maximum delivery pressure (continuous) 16 bar Standard valve calibration 10 bar (other on request) For hydraulic oils, lubricating oils. Max. delivery pressure (continuous): 16 bar Standard built in relief valve setting: 10 bar (other on request) Main field of application: Lubrication circuits, filtration and cooling systems, low pressure auxiliary circuits Installation Data Installation Indoor or Outdoor Environment Industrial Amb. Temperature Min/Max -5°C (CS) and -40°C...

Screw Pumps PDK Series DimensionsSEIM SCREW PUMPS A (...ROHU) A (...RLHU OPTION) Dimensions in mm unless otherwise stated.

Screw Pumps PHS Series SpecificationsSEIM SCREW PUMPS For hydraulic oils, lubricating oils Versions for fuel oils (all types) Maximum delivery pressure (continuous) = 16 bar Flow rates up to 160 L/min With built-in safety valve, adjustable from the outside, also during pump operation. Installation Data Installation: Indoor or Outdoor. Environment: Marine, Industrial. Application: Separator, transfer, booster, feeder, fuel supply, lubricating. Operating Data Handled fluid: Viscosity range: Pump speed: Rotation (viewed from coupling end): Fuel oil HFO - DO - LSMG0 - Hydraulic and Lube...

Screw Pumps PO - PWO Series SpecificationsSEIM SCREW PUMPS For low viscosity lubro-refrigerant fluids, with minimum lubricating properties (minimum oil: 5%) Mineral and natural oils, low-viscosity fuel fluids. Flow rate up to 600 L/min Maximum delivery pressure (continuous) = 100 bar at 2900 rpm Installation Data Installation: Indoor or Outdoor. Environment: Marine, Industrial. Application: Coolant pump for machine tools, deep hole drilling, light oil fuel pumps, fuel transfer. Operating Data Handled fluid: Viscosity range: Pump speed: Rotation (viewed from coupling end): Light fuel...