Catalog excerpts
ROTARY GEAR FLOW DIVIDERS quality products for mechanical & fluid power jbj Techniques Limited, www.jbj.co.uk
Open the catalog to page 1Field-proven Concentric Hydraulic Systems' Rotary Gear Flow Dividers are providing efficient, reliable service for a wide variety of applications in agricultural, materials handling, and construction equipment. These hydraulic flow dividers provide many useful functions from a single pump source: • Synchronized operation of multiple cylinders or fluid motors. • Proportional division of pump output among several circuits. • Intensified pressure when pressure higher than pump capacity is needed. WHY ROTARY GEAR FLOW DIVIDERS INSTEAD OF SPOOL TYPE DIVIDERS? Connected within the hydraulic...
Open the catalog to page 2NOTE: Flows listed above are per section. For European Style GC Flow Dividers, all inlet and outlet ports are 1/2-14 BSPP. * Stock units available in two and four section versions, see page 9. MAXIMUM inlet pressure 3000 psi (207 bar) • MAXIMUM outlet pressure 3500 psi (241 bar). For 3 section flow dividers or flow dividers with unequal sections, contact the factory. Recommended operating range 2000 rpm to 3500 rpm. The curve on the left and the chart above can be useful in selecting the proper size flow divider sections. The curve shows speed vs. flow per section. For equal sized...
Open the catalog to page 3NOTE: Flows listed above are per section. * Stock units available in two and four section versions, see page 9. MAXIMUM inlet pressure 3000 psi (207 bar) • MAXIMUM outlet pressure 4500 psi (310.3 bar). For 3 section flow dividers or flow dividers with unequal sections, contact the factory. Recommended operating range 2000 rpm to 4000 rpm. NOTE: Do not exceed 4500 rpm. Performance The curve on the left and the chart above can be useful in selecting the proper size flow divider sections. The curve shows speed vs. flow per section. For equal sized sections: Assume two section dividers with a...
Open the catalog to page 42 Section GC Series Flow Divider U.S. & European Style NOTE: The only difference between the U.S. version and European version is the porting configuration. The U.S. version has SAE standard ports (refer to page 3) and the European version has 1/2-14 BSPP ports. 83.31 mm [3.28 in] (1.5-4.2cc [.091-.256in3] each section) 96.01 mm [3.78 in] (5.3-8.4cc [.323-.512in3] each section) 166.37 mm [6.55 in] (1.5-4.2cc [.091-.256in3] each section) 191.77 mm [7.55 in] (5.3-8.4cc [.323-.512in3] each section) 191.77 mm [7.55 in] (1.5-4.2cc [.091-.256in3] each section) 217.17 mm [8.55 in] (5.3-8.4cc...
Open the catalog to page 54 Section GC Series Flow Divider U.S. & European Style NOTE: The only difference between the U.S. version and European version is the porting configuration. The U.S. version has SAE standard ports (refer to page 3) and the European version has 1/2-14 BSPP ports. Hydraulic Schematic RELIEF VALVE(S) OUTLET PORTS
Open the catalog to page 62 Section D Series Flow Divider (inches in brackets) Hydraulic Schematic
Open the catalog to page 74 Section D Series Flow Divider (inches in brackets)
Open the catalog to page 8GC Series (U.S. Version) Flow Dividers GC Series (European Version) Flow Dividers D Series Flow Dividers Relief Valve Model Code X-Ref
Open the catalog to page 9How To Order Concentric GC Series Flow Dividers Concentric stocks a selection of GC Series two section and four section flow dividers, which include a built-in adjustable differential relief valve in each section. See page 9 for a list of stock available. If the GC Series flow divider required is not a stock item at Concentric, it may be ordered by following the ordering code show below. Non-stock options require a 100-piece minimum. Determine the number of sections needed. Determine gear size of sections required: Fill in all blanks in model code below: 123456789 F G Relief Valve None One...
Open the catalog to page 10How To Order Concentric D Series Flow Dividers Concentric stocks a selection of D Series two section and four section flow dividers, which include a built-in adjustable differential relief valve in each section. See page 9 for a list of stock available. If the D Series flow divider required is not a stock item at Concentric, it may be ordered by following the ordering code show below. Non-stock options require a 100-piece minimum. EXAMPLE: FD2-V28T7.5-28T7.528T7.5-28T7.5-B10 D Series Flow Divider, two section flow divider, #16 SAE 1-5/16" - 12 inlet port, .813 in.3/rev. (13.3 cc/rev.)...
Open the catalog to page 11COnCEHTRIC PUMPS & MOTORS GC Series Pumps Displacements Heavy Duty 1.06 to 11.65 cc GC Series High/Low Pumps High Pressure Displacements 1.06 to 4.22 cc Low Pressure Displacements 4.22 to 12.71 cc Maximum Pressure 276 bar Maximum Speed 4,000 rpm F12 & F15 Ferra Series Pumps F12 Displacements 16 - 41 cc F15 Displacements 19 to 50 cc Maximum Pressure 276 bar Maximum Speed 3,600 rpm F20/F30 Pumps & F20-LS/F30-LS Load Sense Ferra Series Pumps Displacements 23 to 161 cc Maximum Pressure 276 bar Maximum Speed 3,600 rpm D Series Pumps Displacements 03.80 to 22.85 cc D Series High/Low Pumps High...
Open the catalog to page 12COnCEOTRIC POWER PACKS PUMP/MOTORS (DC/AC) DC Voltage Range 12 to 72VDC AC Horsepower Range 0.367749 to 2.2065 kW Pump Displacements 0.65 to 28 cc HE "BOX" POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.80 to 6.36 cc Maximum Pressure 230 bar Maximum Pressure HB800 POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.60 to 1.5 cc Reservoirs 0.5 to 3.8 litres plastic Maximum Pressure 180 bar HE-Q (QUIET) POWER PACKS Voltage Range 24 VDC WQ300 Pump Displacements 1.2 to 5.7 cc Noise 42dB(A) HE1000 SERIES POWER PACKS Voltage Range 12 to 24 VDC Pump Displacements 0.24 to 2...
Open the catalog to page 13quality products for mechanical & fluid power jbj Techniques Limited 28 Trowers Way, Holmethorpe Industrial Estate Redhill, Surrey RH1 2LW UNITED KINGDOM tel: 01737 767493 fax: 01737 772041 email: info@jbj.co.uk www.jbj.co.uk uk distributor for mfci COnCEflTRIC PRODUCT RANGE HE Powerpacks 12/24/48VDC0.3-4.5kWand 0.75-3 kWACmodular power packs HE Box Powerpacks 12/24/48VDCmodular powerpacks in weatherproof boxes Pressure Switches 5 - 350 bar, connecting/disconnecting W100 Hydraulic pumps 0,5-2,0cc227bar W300 Hydraulic pumps 0,8-5,7cc230bar W600 Hydraulic pumps / motors 3-12cc276bar W900...
Open the catalog to page 14All Jbj Techniques Limited catalogs and technical brochures
-
PUMP DRIVE COMPONENTS
61 Pages
-
Shaft locking devices
92 Pages
-
HIGH/LOW, 2 STAGE / GEAR PUMPS
14 Pages
-
S-Flex Couplings
32 Pages
-
Hydraulic Gear Motors
56 Pages
-
Planetary Gearboxes
48 Pages
-
Yoke Drive Flywheel Couplings
14 Pages
-
Bearing Supported Stub Shafts
12 Pages
-
This is what we do
1 Pages
-
HQ series vane pumps
48 Pages
-
Pneumatic Starters
6 Pages
-
Coolers & Heat Exchangers
78 Pages
-
Hydraulic power take-off units
28 Pages
-
Gear pump summary
12 Pages
-
FLUID POWER ACCESSORIES
66 Pages
-
F15 Ferra Series
20 Pages
-
KT Pressure Switch
8 Pages
-
W Series
8 Pages
-
GPA Series
18 Pages
-
jbj Coolers Summary
2 Pages
-
An excellence in engineering
1 Pages
-
PIPE FLANGES PORT FLANGES
102 Pages
-
TANKS / RESERVOIRS
22 Pages
-
PRESSURE INTENSIFIERS
22 Pages
-
SCREW PUMPS
50 Pages
-
HAZARDOUS AREAS SCREW PUMPS
24 Pages
-
SCREW PUMP RELIEF VALVES
14 Pages
-
BV Series VANE PUMPS
94 Pages
-
BQ Series VANE PUMPS
108 Pages
-
TQ and TV Series VANE PUMPS
36 Pages
-
HQ Series VANE PUMPS
38 Pages
-
B1 and B2 Series VANE PUMPS
10 Pages
-
All steel gear couplings
26 Pages
-
This is jbj Techniques!
28 Pages
-
Vane pumps
10 Pages
-
Fluid power accessories
54 Pages
-
Fluid reservoirs
22 Pages
-
pressure intensifiers
22 Pages
-
screw pumps
50 Pages
-
API 676 compliant screw pumps
24 Pages
-
Petrol engine adaptors
6 Pages
-
Torque limiting couplings
20 Pages
-
Torsional couplings
48 Pages
-
jbj PRODUCT SUMMARY
6 Pages
-
Equipment for Hazardous Areas
44 Pages
-
PDC
58 Pages